Home/ Physics/ Chapter 1 — Electric Charges and Fields
Class 12 Physics · Chapter 1 · Enhanced Edition

Electric Charges and Fields

Deep explanations, 20+ real-life examples, 3D diagrams, interactive simulator, exam traps, and a printable formula sheet — everything you need to master this chapter in one place.

14Concepts
20+Real-life Examples
53D Diagrams
1Simulator
The Big Picture

🗺️ How Everything Connects

Before diving into individual sections, here's the entire chapter on one page. Use this as a mental map — every topic is a link in this chain.

Electric Charge Coulomb's Law Electric Field Field Lines & Flux Gauss's Law Field Applications Dipole Torque p×E "Field of a pair of charges" "Symmetry shortcut" Two opposite charges = new physics
Key Takeaway

Charge → Force (Coulomb) → Field → Field Lines & Flux → Gauss's Law → Applications. Every concept builds on the previous. If you understand this chain, you can re-derive everything!

Section 01

Electric Charge — The Story of an Invisible Force

1.1Why Study Charge? A Spark You've Felt

Rub your palm on your woollen sweater for 5 seconds, then touch a metal doorknob. Zap! You feel a sharp spark. Why? Because friction between your skin and the sweater pulls electrons off the wool and deposits them on you. You become negatively charged. The doorknob (a conductor) is neutral, so when you touch it, the surplus electrons jump across in a spark.

This was the very first electrical phenomenon noticed by humans, over 2,500 years ago. Around 600 BC, the Greek philosopher Thales of Miletus observed that amber (fossilised tree resin, Greek name: elektron), when rubbed with wool, attracted feathers and straw. This is why we call the phenomenon "electricity".

Real Life Connect
  • Static spark on a TV screen — dry weather amplifies charge buildup.
  • Clothes sticking in a dryer — opposite charges on different fabrics attract.
  • Photocopiers & laser printers — toner (charged) sticks to the charged image.
  • Spray painting cars — paint and body oppositely charged → uniform coating, no waste.
  • Electrostatic precipitators — factory smoke particles charged & captured. 99% pollution removed!

Two kinds of charge — and why only two?

Benjamin Franklin (the kite-and-lightning guy) coined the terms positive and negative. The rule is simple:

The Fundamental Rule

Like charges repel — two positive, or two negative.

Unlike charges attract — positive & negative.

Same rule whether in your sweater, a lightning bolt, or inside an atom.

Why This Matters

If the rule were reversed, the universe would collapse instantly! Positive nuclei would attract negative electrons so strongly that every atom would shrink to nothing. Life would be impossible. This one rule defines the size of atoms, the strength of matter, and the structure of the universe.

V1 · Live demo — like repels, unlike attracts + + REPULSION + − ATTRACTION

How does a body get charged? Three ways

Method What Happens Real-Life Example
Friction Electrons transfer when two different materials are rubbed. Material that holds electrons weakly loses them (becomes +); the other gains (becomes −). Glass rod + silk → glass +, silk −. Shoes on carpet → you charged.
Conduction Charged body touches neutral body. Charge flows directly, sharing equally if identical. Touching a charged sphere to another → both end up equally charged.
Induction Charged body brought near neutral body — no contact. Opposite charges rearrange. Charged balloon stuck to a wall — the wall's electrons shift, leaving the surface + charged.
V1b · Charging by induction — 3-step visual ① Bring charged rod near Neutral sphere + Charges stay put. No effect. ② Ground the sphere − − − + Electrons escape to ground. ③ Remove ground, then rod + + + + + + + Sphere now positively charged.
Charging by induction — no direct contact needed
Analogy

Think of charge as water in buckets. Rubbing = pouring from one bucket to another. Touch (conduction) = connecting two buckets at the same level. Induction = placing a bucket near a drain so water flows out automatically without touching.

Common Mistake

Mistake: "Charging a body creates new charges."
Correction: No! Charge is neither created nor destroyed. Electrons are simply transferred. If one body gains −5 μC, the other loses exactly −5 μC (gains +5 μC). Total = zero before and after. This is the law of conservation of charge.

1.2Conductors vs Insulators — Why Do Charges Move or Stay?

V2b · Conductors vs insulators — atomic view CONDUCTOR (e.g., copper) Free electrons flow throughout INSULATOR (e.g., glass) Electrons locked to atoms — no flow
In a conductor, some electrons are free; in an insulator, they are bound.
Type Atomic Structure Charge Behaviour Real Examples
Conductors Some electrons are free — a "sea of electrons" can move anywhere. Charge instantly distributes over the entire surface. Copper wire, silver, aluminium, salt water, human body, the Earth.
Insulators All electrons tightly bound to specific atoms. Charge stays exactly where placed. Glass, plastic, rubber, wood, silk, dry air, diamond.
Semiconductors In between — temperature/impurities control conductivity. Conductivity depends on conditions. Silicon, germanium, GaAs — basis of all computer chips!
Real Life Connect

Why is a metal phone safer than plastic for electronics? Any static charge from your hand flows around the metal surface and is dissipated — not reaching the chips inside. That's also why circuit boards are wrapped in conductive antistatic bags during shipping.

Why do we use plastic-coated wires? The metal inside conducts current. The plastic coating (insulator) prevents leakage into your body or surroundings. Both materials are essential!

Why do birds sit safely on high-voltage wires? Their feet touch the same wire (same potential), so no current flows through them. If the bird touched two wires at once, or the wire and the ground — zap!

1.3Three Properties of Electric Charge

Property Statement Why It Matters
Additivity Charges add like real numbers (with signs). Total q = q₁+q₂+q₃. Charge is a scalar, not a vector — no direction, just magnitude + sign.
Conservation Total charge of an isolated system is constant. Charge moves but is never created/destroyed. Even particle creation (e.g., neutron → proton + electron + antineutrino) produces equal + and − charges.
Quantisation q = ne, where e = 1.602 × 10⁻¹⁹ C. No fractional e. Charge is grainy like matter being made of atoms. Millikan's oil-drop experiment (1912) proved this.
V2c · Charge is quantised — integer counts of e q = n × e   |   e = 1.6 × 10⁻¹⁹ C 1e n = 1 2e n = 2 3e n = 3 −1e n = −1 −2e n = −2 1 C ≈ 6.25×10¹⁸ e
Exam Trap

"Charge is quantised, so at macroscopic scale we can have continuous charge." — This is not a contradiction! At the macro scale, the number of electrons n is so large (~10¹³ for 1 μC) that the "graininess" is invisible — the same way a sand dune looks continuous from far away. Quantisation still holds; it's just impractical to count.

Try This at Home

Feel quantisation indirectly: Rub a balloon on your hair. Bring it near a thin stream of water from a tap. You'll see the water bend toward the balloon — that's millions of billions of electrons interacting with polar water molecules. Notice the effect is smooth, not "jumpy" — exactly because quantisation is invisible at macro scale.

Key Takeaway

Charge has three ironclad properties: it adds like a scalar, it's conserved in any closed system, and it comes in discrete lumps of e = 1.6 × 10⁻¹⁹ C. These hold everywhere — from atoms to galaxies.

Section 02

Coulomb's Law — The Force Between Charges

1.4How Strong Is the Force? Coulomb's Discovery (1785)

The French physicist Charles-Augustin de Coulomb answered this in 1785 using a clever device: the torsion balance. He suspended a charged pith ball on a fine wire and brought another charged ball nearby. The wire twisted. By measuring the twist angle, he discovered a simple law:

Coulomb's Law

F = (1 / 4πε₀) · (|q₁ q₂| / r²)

Where k = 1/4πε₀ ≈ 9 × 10⁹ N·m²/C² and ε₀ = 8.854 × 10⁻¹² C²/N·m².

Direction: along the line joining the charges. Same signs → repel; opposite signs → attract.

Coulomb's Law Simulator — drag the sliders

Force between the charges 0.90 N (F = k·q₁·q₂/r²)
Real Life Connect
  • Why do protons stay in the nucleus? They don't! Their electric repulsion is enormous. The strong nuclear force (100× stronger, ~10⁻¹⁵ m range) holds them. Beyond that range, Coulomb wins — that's nuclear fission.
  • Inkjet printers — charged droplets deflected by charged plates (Coulomb).
  • Clothes in a dryer — opposite charges attract; Coulomb force holds fabrics together.
  • Water as a solvent — polar water molecules surround ions and pull them apart via Coulomb attraction.
V3 · Coulomb force — animated attraction between unlike charges + q₁ − q₂ r = separation |F| = k |q₁q₂| / r²

Electric vs gravitational force

Aspect Electric (Coulomb) Gravitational (Newton)
Formula F = k q₁q₂/r² F = G m₁m₂/r²
Constant k ≈ 9 × 10⁹ G ≈ 6.67 × 10⁻¹¹
Sign + (repel) or − (attract) Always attractive
Medium Depends (÷K in medium) Independent
Relative strength (2 protons, 10⁻¹⁵ m) F_e ≈ 230 N F_g ≈ 1.9 × 10⁻³⁴ N
Ratio F_e/F_g ≈ 1.3 × 10³⁶
Why This Matters

Electric force is 10³⁶ times stronger than gravity! So why don't we feel it? Because most objects are electrically neutral — positive and negative charges cancel. Gravity is always attractive and never cancels, so it dominates at astronomical scales. Gravity rules the cosmos; electricity rules the atom.

Common Mistake

Mistake: "Coulomb's law gives the total force on a charge from all others."
Correction: It gives force between two point charges. For more, use superposition (next section).

Mistake: "Force uses distance between plates/objects."
Correction: Coulomb works only for point charges (or spherically symmetric distributions, which act like point charges at the centre).

Key Takeaway

Coulomb's law: F = k|q₁q₂|/r². It's the electric analogue of gravity — but 10³⁶ times stronger. Direction along the connecting line. Valid for point charges only.

1.5Superposition — Adding Forces as Vectors

Superposition Principle

The total force on any charge due to several others is the vector sum of individual pairwise forces. Each pair acts as if the others weren't there.

F₁ = F₁₂ + F₁₃ + F₁₄ + … + F₁ₙ

Analogy

Three friends pushing a box from different directions. Each push is independent — but the box responds to the "net push" (vector sum). Superposition is the same idea for forces.

Real Life Connect

H₂O molecule: Oxygen has a slight negative charge; each H is slightly positive. The field at any point near the molecule is the vector sum of three charged centres. This superposition is what makes water polar — enabling its role in every cell of your body.

Protein folding: Millions of electrostatic forces between atoms superpose to give each protein its unique 3D shape. Drugs work by interfering with these specific vector sums.

Key Takeaway

N charges? Use superposition — add the individual forces as vectors. Each pair is independent of others. This reduces complex problems to simple vector sums.

Section 03

Electric Field — The Invisible Messenger

1.6Why Invent the Idea of "Field"?

If I move a charge on Earth, how does a charge on the Moon know instantly to move? Relativity says nothing travels faster than light, so the "signal" must take time. Yet Coulomb's law has no time in it — it says force depends on where the charges are right now. That's an apparent paradox.

To resolve this, physicists introduced the electric field: charge A creates a field everywhere; the field propagates at speed c; charge B feels a force proportional to the field there.

Electric Field (E)

Force per unit positive test charge:

E = lim(q₀ → 0) F / q₀

Units: N/C (or V/m). It's a vector field — magnitude + direction at every point.

Field of a Point Charge

E = (1 / 4πε₀) · (Q / r²) · r̂

Positive Q → radially outward. Negative Q → radially inward. Falls off as 1/r².

V5b · 3D field of a point charge — radial in all directions + Positive Q − Negative Q 3D view — field emanates in ALL directions (not just this plane)
The sphere shading + lat/long lines give a 3D feel. Field truly spreads in all 3 dimensions.
Real Life Connect
  • Earth's electric field near ground: ~100 V/m on a clear day — why a charged comb can lift paper at close range.
  • Power lines: A 400 kV line creates 100s of V/m at ground level — you feel it on humid days (hair lifting).
  • Microwave ovens: The field oscillates 2.45 billion times/sec. Water dipoles try to follow — friction heats food.
  • Capacitive touchscreens: Detect your finger through the tiny disturbance its charge makes in the screen's field.
Key Takeaway

Field = force per unit charge. E = kQ/r² for a point charge. Radially outward for +, inward for −. Field exists whether or not you place a test charge — it's an independent physical entity that carries energy.

Section 04

Electric Field Lines — Drawing the Invisible

1.7Faraday's Visualisation

Michael Faraday, largely self-taught, invented "lines of force" — curves showing the direction of E at every point. Density tells strength. Tangent gives direction.

Rules for Field Lines
  1. Start on positive charges, end on negative (or infinity).
  2. Never cross — otherwise two directions at one point.
  3. No closed loops in electrostatics (field is conservative).
  4. Continuous in charge-free regions.
  5. Density ∝ field strength |E|.
Analogy — River Currents

Narrow channel → fast water → dense lines. Wide lake → slow water → sparse lines. Direction of flow gives velocity. No two flow directions at the same point. No loops in a static river. Same rules apply to E-field lines.

V6 · Field lines — animated flow for 4 configurations + Single + − Single − + + Two + (repel) + − Dipole (+ −)
Common Mistake

Mistake: "Field lines are paths of charged particles."
Correction: They show the direction of force, not trajectory. A moving particle curves based on its own velocity. Only a particle starting from rest follows a field line.

Mistake: "Field lines are physical."
Correction: They're a visual aid. The field is real (carries energy); the lines are a mental model.

Real Life Connect

Lightning rods: The sharp tip creates dense field lines — ionising air and providing a path for lightning. The rod "invites" the strike and safely channels it to the ground.

Corona discharge on power lines: At high voltages, sharp points have such intense fields that they ionise air (bluish glow, "St. Elmo's fire" on ships).

Key Takeaway

Field lines: start on +, end on −, never cross, never loop. Density ∝ |E|. They're your mental map of the field — but they are NOT trajectories of particles.

Section 05

Electric Dipole — The Most Important Molecule Shape

1.10What is a Dipole?

A pair of equal and opposite charges +q and −q separated by 2a. Net charge = 0, but the field is NOT zero — because the charges are at different points, their fields partially survive.

Dipole Moment

p = q × 2a, direction from −q to +q. Unit: C·m. Vector quantity.

V7b · 3D dipole — field in all planes around the axis p − + Dipole field wraps around the axis — 3D ellipses represent field loops at different planes
Real Life Connect

Water is the most famous dipole. Oxygen (δ−) hogs electrons; hydrogens (δ+) carry slight positives. The bent 104.5° shape means the two C-H pulls don't cancel — permanent dipole moment ~6.2×10⁻³⁰ C·m. This is why water is an amazing solvent, has a high boiling point (H-bonds), and heats in a microwave.

Microwave ovens work because water is a dipole — 2.45 GHz oscillating field makes water molecules flip millions of times per second. Molecular friction heats your food. A dry plate doesn't heat; curry does.

Field of a Dipole — Two Key Positions

Position Field Direction
On the axis E = (1/4πε₀) · (2p / r³) Along p
Equatorial plane E = (1/4πε₀) · (p / r³) Opposite to p

Axial field is twice as strong as equatorial. Both fall off as 1/r³ — faster than 1/r² of a point charge, because the two fields partially cancel.

Key Takeaway

Dipole = +q and −q separated by 2a. p = q·2a from − to +. Field falls as 1/r³ (faster than point charge). Axial field is 2× equatorial. Water is the most famous natural dipole.

1.11Dipole in a Uniform Field — Torque

+q feels qE (along E); −q feels −qE (opposite). Net force = zero. But the forces are not collinear → couple → torque.

Torque on a Dipole

τ = p × E  |  |τ| = pE sin θ

Tends to align p with E. Potential energy: U = −p·E = −pE cos θ

V8 · Dipole in uniform field — rotating to align with E E (uniform) − + τ p |τ| = pE sin θ  |  U = −pE cos θ
Real Life Connect

Why do polar molecules align in an electric field? Like compass needles in Earth's field. This is dielectric polarisation — the alignment reduces the net field inside a dielectric. This effect is what makes capacitors work (Chapter 2).

LCD screens: Liquid crystal molecules are elongated dipoles. Applying a field toggles their orientation → light passes or blocks → pixels turn on/off.

Common Mistake

Mistake: "Force on a dipole in uniform field = pE."
Correction: Net force = zero (forces cancel). Only torque τ = p×E acts. In non-uniform field there's a net force, but that's a separate case.

Key Takeaway

In a uniform field, a dipole feels zero net force but a torque τ = p×E that tries to align p with E. Energy U = −pE cosθ is minimum (most stable) when aligned.

Section 06

Electric Flux — Field Through a Surface

1.8What is Flux?

Imagine a fishing net in a river. Water through the net depends on: flow speed, net size, and — crucially — orientation. Perpendicular → max flow. Parallel → zero flow. Same for electric flux.

Electric Flux

Δφ = E · ΔS = E · ΔS · cos θ

θ = angle between E and normal n̂.

Unit: N·m²/C (or V·m). It's a scalar (dot product of two vectors).

V9 · Flux changes with surface tilt θ = 0°, φ max θ 0° < θ < 90° θ = 90°, φ = 0
Area as a Vector

A flat surface is represented by a vector ΔS whose magnitude is the area and direction is the outward normal (for closed surfaces). Flux = E·ΔS is a proper dot product.

Common Mistake

Mistake: "Flux is a vector."
Correction: Flux is a scalar (dot product). Can be positive, negative, or zero.

Mistake: "Only enclosed charge contributes to E."
Correction: E is due to ALL charges. Only the flux through a closed surface depends solely on enclosed charge.

Key Takeaways

Flux = E·ΔS = EΔS cosθ. Maximum when E ⊥ surface (θ=0). Zero when E ∥ surface (θ=90°). Flux is a scalar.

Section 07

Gauss's Law — The Shortcut That Changed Physics

1.12The Law and Why It's Powerful

For symmetric charge distributions (sphere, wire, plate), instead of integrating over all charges, Gauss's law gives a shortcut:

Gauss's Law

φclosed = ∮ E · dS = qenclosed / ε₀

Total flux through any closed surface = (1/ε₀) × total enclosed charge. True for ANY closed surface — sphere, cube, potato-shaped. The surface is called a Gaussian surface.

Why It's a Big Deal

Gauss's law is universally true — one of Maxwell's 4 equations. It works for static charges, moving charges, oscillating fields, gravitational fields, and even in general relativity! It's the mathematical statement of the inverse-square law.

V10 · Gauss's law — animated expanding Gaussian sphere + φ = ∮ E·dS = q / ε₀ For a sphere: E × 4πr² = q/ε₀ E = q / (4πε₀r²) Same as Coulomb's law!
Analogy — Faucet in a Bag

A faucet inside a sealed bag — total water flowing out per second = faucet's rate, regardless of the bag's shape. Sphere, cube, or weird rubber shape — doesn't matter. Same for Gauss: total flux through any closed surface = (charge inside) / ε₀.

Real Life Connect

Faraday cages: A metal cage shields its interior — the charge redistributes on the walls, cancelling the external field inside. Direct consequence of Gauss's law. That's why cars, airplanes, MRI rooms are safe during lightning.

Coaxial cables (TV/internet): inner & outer conductors arranged so field stays between them, never leaking to interfere with other signals.

Key Takeaway

Total flux through any closed surface = qenc/ε₀. Only enclosed charge matters for flux; E is due to all charges. For symmetric distributions, this gives the field almost without calculation.

Section 08

Applications of Gauss's Law

1.13Fields from Symmetry

Configuration Gaussian Surface Field E Real Example
Infinite wire (λ per length) Coaxial cylinder E = λ / (2πε₀r), radial Power lines, lightning rods
Infinite plane sheet (σ per area) Pillbox E = σ / (2ε₀), perpendicular Capacitor plates, charged sheet
Thin spherical shell (radius R) Sphere (any r) Outside: E = q/(4πε₀r²)
Inside: E = 0
Charged metal sphere, Faraday cage
Solid sphere (uniform ρ) Sphere (any r) Outside: E = q/(4πε₀r²)
Inside: E = ρr/(3ε₀)
Charged plastic ball, thundercloud
V11b · 3D infinite plane sheet — field perpendicular on both sides Charged plane sheet (σ) E E Pillbox Gaussian surface E = σ/(2ε₀) — same magnitude on both sides, independent of distance
V12 · Charged spherical shell — field zero inside + Radius R Gaussian r < R Gaussian r > R Outside (r > R): E = q/(4πε₀r²) Field as if all charge at centre Coulomb-like behaviour Inside (r < R): E = 0 No charge enclosed → no flux Gauss's law → E = 0
Real Life Connect

Your car during a thunderstorm: Safe because its metal body is a Faraday cage. Charge flows around the outside, interior stays field-free. (But only safe if you're fully enclosed — not touching outside-connected parts.)

Why phone signals fail in an elevator: The metal elevator car is a Faraday cage for RF waves.

MRI rooms: Powerful fields contained within metal-shielded rooms — Gauss's law keeps outside interference out and imaging fields in.

Common Mistake

Mistake: "Field inside a hollow sphere is zero because it's empty."
Correction: It's zero because the enclosed charge is zero. If you put a charge inside, the field inside becomes non-zero (only the empty, charge-free cavity has zero field).

Key Takeaway

For symmetric charge distributions, Gauss's law gives E almost instantly. Key results: wire → λ/(2πε₀r), sheet → σ/(2ε₀), sphere outside → q/(4πε₀r²), sphere inside (shell) → 0. This is the foundation of Faraday cages and coaxial cables.

Practice

📝 Solved Examples with Step Marking

📋 3 Marks

Q1. Two point charges q₁ = +2 μC and q₂ = −2 μC are placed 10 cm apart. Calculate the force between them. Is it attractive or repulsive?

Given ½ Mark

q₁ = 2 × 10⁻⁶ C, q₂ = −2 × 10⁻⁶ C, r = 0.1 m

Coulomb's Law 1½ Marks

F = k|q₁q₂|/r² = (9×10⁹ × 2×10⁻⁶ × 2×10⁻⁶) / (0.1)² = 3.6 N

Nature 1 Mark

Opposite signs → attractive.

F = 3.6 N, attractive
📋 3 Marks

Q2. A charge q = 2 μC is placed at the origin. Find the electric field at a point P at 30 cm on the x-axis, and the force on a charge of −1 μC placed at P.

Field at P 1½ Marks

E = kq/r² = (9×10⁹ × 2×10⁻⁶)/(0.3)² = 2×10⁵ N/C along +x.

Force 1½ Marks

F = q₀E = (−1×10⁻⁶)(2×10⁵) = −0.2 N → towards origin.

E = 2×10⁵ N/C (+x), F = 0.2 N towards origin
📋 5 Marks

Q3. Use Gauss's law to derive the field due to an infinitely long straight wire (linear charge density λ).

Symmetry 1 Mark

Field is radial, depends only on r.

Gaussian Surface 1 Mark

Coaxial cylinder (radius r, length ℓ).

Flux 1½ Marks

φ = E × 2πrℓ (curved) + 0 (ends)

Apply Gauss 1 Mark

E × 2πrℓ = λℓ/ε₀

Result ½ Mark

E = λ/(2πε₀r)

E = λ/(2πε₀r), radial
📋 3 Marks

Q4. A dipole has charges ±2 μC separated by 4 mm. Find the field 20 cm from centre on the axis.

Dipole Moment 1 Mark

p = q × 2a = 2×10⁻⁶ × 4×10⁻³ = 8×10⁻⁹ C·m

Check r ≫ a ½ Mark

r/a = 100, valid.

Axial Field 1½ Marks

E = (1/4πε₀)(2p/r³) = (9×10⁹ × 2 × 8×10⁻⁹)/(0.2)³ = 1.8 × 10⁴ N/C

E = 1.8 × 10⁴ N/C along the axis
📋 2 Marks

Q5. Why must E be normal to a conductor's surface?

Reasoning 1 Mark

If E had a tangential component, free charges would move — current would flow, contradicting electrostatics.

Conclusion 1 Mark

Hence E must be normal to the surface.

E is normal — otherwise charges would move
📋 3 Marks

Q6. Charge q at centre of a cube. Flux through one face?

Total Flux 1 Mark

φtotal = q/ε₀ (cube encloses charge).

Symmetry 1 Mark

All 6 faces symmetric → equal flux.

Result 1 Mark

φface = q/(6ε₀)

φface = q/(6ε₀)
📋 5 Marks

Q7. State Gauss's law. Find E due to a uniformly charged thin spherical shell at (a) outside, (b) inside.

Statement 1 Mark

φ = ∮E·dS = qenc/ε₀.

Outside (r > R) 2 Marks

Gaussian sphere radius r. E × 4πr² = q/ε₀ → E = q/(4πε₀r²).

Inside (r < R) 2 Marks

Gaussian sphere radius r. qenc = 0 → E × 4πr² = 0 → E = 0.

Outside: E = q/(4πε₀r²); Inside: E = 0
Quick Reference

📐 Complete Formula Sheet

Chapter 1 — All Formulas on One Page

Coulomb's Law
F = (1/4πε₀) · q₁q₂/r²
Electric Field (Point)
E = (1/4πε₀) · Q/r²
Field of System
E = Σ Eᵢ (vector sum)
Dipole Moment
p = q × 2a
Axial Dipole Field
E = (1/4πε₀) · 2p/r³
Equatorial Dipole Field
E = (1/4πε₀) · p/r³
Torque on Dipole
τ = p × E  |  |τ| = pE sinθ
Dipole Potential Energy
U = −pE cosθ
Electric Flux
φ = E · ΔS = EΔS cosθ
Gauss's Law
∮E·dS = qenc/ε₀
Line Charge Field
E = λ/(2πε₀r)
Plane Sheet Field
E = σ/(2ε₀)
Shell Outside
E = q/(4πε₀r²)
Shell Inside
E = 0
Solid Sphere Inside
E = ρr/(3ε₀) = qr/(4πε₀R³)
Constants
k = 9×10⁹, ε₀ = 8.85×10⁻¹², e = 1.6×10⁻¹⁹

📖 Notation Key

q, Q Electric charge (coulomb, C)
E Electric field (N/C or V/m)
p Electric dipole moment (C·m)
φ Electric flux (N·m²/C)
λ Linear charge density (C/m)
σ Surface charge density (C/m²)
ρ Volume charge density (C/m³)
ε₀ Permittivity of free space (8.854×10⁻¹² C²/N·m²)
k Coulomb constant = 1/4πε₀ ≈ 9×10⁹ N·m²/C²
e Elementary charge = 1.6×10⁻¹⁹ C
Test Yourself

✍️ MCQ Practice

Score: 0 / 12
New Pattern

🎯 Assertion–Reason

(A) Both true, R explains A. (B) Both true, R does NOT explain A. (C) A true, R false. (D) A false, R true.

Score: 0 / 6