Home/ Physics/ Chapter 10 — Wave Optics
Class 12 Physics · Chapter 10 · Rebuilt from NCERT

Wave Optics

From Huygens' brilliant construction to the interference fringes that prove light is a wave — with animated wavefronts, interactive Young's double-slit simulator, 3D diffraction patterns, and 20+ real-life examples.

7Sections
20+Real-life Examples
11Diagrams
1Simulator
The Big Picture

🗺️ How Everything Connects

Before diving in, here's the entire chapter on one page. This is your mental map — every topic is a link in this chain.

Huygens Principle Wavefront Propagation Coherent Sources Interference Young's Diffraction Single slit Polarisation Malus law Wave- particle Snell's + reflection Colors & CD rainbow "Wave nature proves light is a wave" Everyday phenomena
Key Takeaway

Huygens' principle lets us propagate wavefronts and derive reflection and refraction. Coherent sources give stable interference (Young's double slit). Single-slit diffraction shows wave bending around edges. Polarisation proves light is a transverse wave. Together, they show light is fundamentally a wave — until the photoelectric effect proves it's also a particle.

Section 01

Introduction — Corpuscular vs Wave Model

10.1Two Competing Models of Light

For 300 years, physicists debated whether light is made of particles or is a wave. The debate shaped the history of optics.

AspectCorpuscular (Newton)Wave (Huygens)
ProposedDescartes (1637), Newton (1704)Huygens (1678), Young (1801)
NatureParticlesWave
Predicts in refraction (denser medium)Speed fasterSpeed slower
Explains interference?NoYes
Verified by experiment (Foucault 1850)Speed faster — wrongSpeed slower — correct
Why the Wave Model Won (Eventually)

The corpuscular model was favored for 150 years mainly because of Newton's authority. But when Thomas Young (1801) showed interference fringes — a quintessentially wave phenomenon — the wave model gained ground. Foucault (1850) showed that light travels SLOWER in water than in air, which only the wave model predicted.

Maxwell (1865) then showed light is an electromagnetic wave, unifying optics with electromagnetism. But the photoelectric effect (1905) later showed light also behaves as particles — the wave-particle duality!

Real Life Connect
  • Rainbows: Explained by ray optics (refraction + internal reflection).
  • Interference colors on soap bubbles: Explained only by wave optics!
  • CD rainbow reflections: Diffraction (wave optics).
  • Sunglasses with polarised lenses: Polarisation (wave optics).
  • Anti-reflection coatings on glasses: Thin-film interference.
  • Holograms: Wave interference captured on film.
Key Takeaway

Light travels as a wave (Huygens/Young/Maxwell) but behaves as particles too (Einstein). Wave optics explains interference, diffraction, polarisation — phenomena that ray optics can't explain.

Section 02

Huygens Principle

10.2The Brilliant Geometric Construction

Wavefront (from NCERT)

A wavefront is a surface of constant phase. All points on a wavefront oscillate in phase (they're at the same distance from a point source).

Types of wavefronts:

  • Spherical: From a point source. Concentric spheres.
  • Plane: At large distance from source, small portion of sphere looks flat.
  • Cylindrical: From a line source.

The ray is perpendicular to the wavefront. Energy travels along rays.

V1 · Spherical vs plane wavefronts Spherical wavefronts (point source) q Rays ⊥ wavefronts · outward Plane wavefronts (far from source) Parallel rays · wavefronts are planes
Huygens Principle (from NCERT)

Given the shape of a wavefront at time t, we can determine its shape at any later time τ using three rules:

  1. Every point on a wavefront acts as a source of secondary wavelets that spread out in all directions at the speed of the wave (v).
  2. The new wavefront is the forward envelope (common tangent) of all these secondary spherical wavelets.
  3. The backward wave (backwave) does not exist — Huygens assumed amplitude of secondary wavelets is zero in the backward direction (later justified by more rigorous theory).
V2 · Huygens construction — spherical and plane wavefronts Spherical wavefront → new sphere Spheres of radius vτ from each point New wavefront = forward envelope Plane wavefront → new plane Semicircles from each point New plane = forward envelope
Analogy — Ripples in a Pond

Drop a stone in a pond. A circular ripple spreads out. Now imagine every point on that ripple is a tiny stone drop — each creates its own circular ripple. The sum of all these mini-ripples produces the NEXT ripple (the new wavefront). That's Huygens' insight. It's like the wave is "self-recreating" at every moment — the wavefront itself becomes the new source.

Why No Backwave?

Huygens assumed secondary wavelets have zero amplitude in the backward direction. This was an ad hoc assumption in his time — later, Fresnel and Kirchhoff showed via rigorous wave theory that the backwave amplitudes destructively interfere and cancel out, so the net backwave is zero. But for reflection/refraction problems, Huygens' original assumption gives correct results.

Key Takeaway

Wavefront = surface of constant phase. Rays are perpendicular. Huygens: each point on a wavefront is a source of secondary wavelets; new wavefront = forward envelope. No backwave (destructive interference cancels it). This simple geometric rule derives ALL of reflection, refraction, and diffraction.

Section 03

Refraction and Reflection using Huygens Principle

10.3Deriving Snell's Law and the Law of Reflection

Setup (from NCERT)

Plane wavefront AB is incident at angle i on interface PP' between medium 1 (speed v₁) and medium 2 (speed v₂).

Time for B to reach C: τ = BC/v₁

Distance traveled by wavelet from A in medium 2: AE = v₂·τ

Refracted wavefront: CE (tangent from C to sphere of radius v₂τ around A)

V3 · Huygens construction for refraction — bending toward normal Medium 1 (v₁, faster) Medium 2 (v₂, slower) A B C E i r sin i / sin r = v₁/v₂ = n₂/n₁ → Snell's Law!
Huygens construction gives Snell's law. Wave bends toward normal because v₂ < v₁.
Derivation of Snell's Law (from NCERT)

In triangles ABC and AEC:

sin i = BC/AC = v₁τ/AC

sin r = AE/AC = v₂τ/AC

Dividing: sin i / sin r = v₁ / v₂

Using n₁ = c/v₁, n₂ = c/v₂: n₁ sin i = n₂ sin r

Also: λ₁/λ₂ = v₁/v₂ (wavelengths scale with speed). Frequency ν stays same across interface!

Derivation of Reflection Law (from NCERT)

For reflection, both incident and reflected waves are in the same medium (same speed v).

BC = vτ = AE. Triangles ABC and AEC are congruent.

Therefore angle of incidence = angle of reflection (i = r)

V4 · Huygens construction for reflection Reflecting surface A B C i r Triangles ABC and AEC congruent → i = r Law of reflection follows from Huygens geometry!
Reflection: BC = AE (same speed). Triangles congruent → i = r.
Real Life Connect
  • Refraction through glass: Ray bends toward normal — this is how lenses work.
  • Apparent depth: Objects look shallower in water — Huygens predicts this.
  • Lateral shift through glass slab: Emergent ray parallel to incident ray (refraction twice at parallel surfaces).
  • Total internal reflection: When i > critical angle in denser→rarer, Huygens predicts no refracted wave.
  • Mirages: TIR of sky light off hot air layer.
  • Dispersion by prism: Different wavelengths bend by different amounts (different n).
Key Takeaway

Huygens' construction derives both reflection (i = r) and refraction (Snell's law n₁ sin i = n₂ sin r) from a single geometric principle. The speed ratio sin i/sin r = v₁/v₂ was the decisive experiment (Foucault) that proved the wave theory.

Section 04

Coherent and Incoherent Addition of Waves

10.4Interference — When Waves Add Up or Cancel

When two waves overlap at a point, their displacements add (superposition principle). If their phase difference stays constant, the sum is a stable pattern. This is interference.

Coherent vs Incoherent Sources

Coherent: Two sources with a fixed, non-varying phase difference. They produce stable interference fringes.

Incoherent: Two sources whose phase difference changes rapidly with time. Their intensities just add — no fringes.

Ordinary light sources (like two sodium lamps) are incoherent — they emit in very short bursts (~10⁻¹⁰ s) with random phases. Laser light is highly coherent.

Interference Conditions (from NCERT)

Constructive: Path difference = nλ (n = 0, 1, 2, ...). Resultant intensity = 4I₀

Destructive: Path difference = (n + ½)λ. Resultant intensity = 0

For a general phase difference φ, intensity: I = 4I₀ cos²(φ/2)

Where I₀ = intensity from each source individually.

V5 · Constructive vs destructive interference CONSTRUCTIVE (in phase) y₁ y₂ y₁+y₂ Amplitudes ADD · I = 4I₀ (bright) DESTRUCTIVE (out of phase) y₁ y₂ y₁+y₂ Amplitudes CANCEL · I = 0 (dark) Both sources have the same wavelength — only the phase differs
Intensity Formula (general)

Two coherent sources of intensity I₀ each, with phase difference φ:

I = 4I₀ cos²(φ/2)

Where φ = 2π/λ × (path difference)

Max intensity: 4I₀ (when φ = 0). Min intensity: 0 (when φ = π).

For incoherent sources: I = 2I₀ (intensities just add, no interference term).

Real Life Connect
  • Soap bubble colors: Light reflecting from front and back surfaces of the thin film interferes — different colors at different thicknesses.
  • Anti-reflection coatings: Thin layers on glasses create destructive interference at 550 nm — so more light passes through.
  • Laser interferometers (LIGO): Detect gravitational waves by measuring interference shifts of order 10⁻¹⁸ m!
  • CD/DVD rainbow surface: Interference from tiny pits on the disc.
  • Newton's rings: Circular interference fringes from an air wedge between lens and flat glass.
  • Holograms: Interference patterns captured on film — reconstruct 3D images.
  • Iridescent butterfly wings: Thin-film interference creates the colors (no pigment!).
Key Takeaway

Coherent sources = fixed phase → stable interference. Constructive (path diff = nλ): I = 4I₀. Destructive (path diff = (n+½)λ): I = 0. General: I = 4I₀cos²(φ/2). Explains soap bubbles, anti-reflection coatings, LIGO, and Newton's rings.

Section 05

Interference of Light and Young's Experiment

10.5The Experiment That Proved Light Is a Wave

In 1801, Thomas Young used a simple trick to make two coherent sources from one: pass light through a single pinhole S, then through two closely spaced pinholes S₁ and S₂. Because both S₁ and S₂ derive from S, they have the same phase — they're coherent.

Young's Double Slit Experiment

Setup: Slits S₁ and S₂ separated by distance d, screen at distance D (D ≫ d).

Path difference at point P on screen: Δx = S₂P − S₁P ≈ xd/D

Where x = position of P on screen from center (perpendicular distance to slits).

Constructive (bright fringes): xd/D = nλ → x_n = nλD/d

Destructive (dark fringes): xd/D = (n+½)λ → x_n = (n+½)λD/d

Fringe width (spacing between consecutive bright or dark fringes):

β = λD/d

V6 · Young's double slit — geometry and fringe pattern S S₁ S₂ Barrier d Screen P O (center) x D (distance) Bright Dark Fringe width β = λD/d (equally spaced)

Young's Double Slit Simulator — see how fringe width changes

Fringe width β = λD/d
2.75 mm
Observation
Visible fringes
Real Life Connect
  • Sodium light demonstration: Classic physics lab — yellow fringes easily seen with two razor-blade slits.
  • Optical interferometers: Measure tiny displacements — this is how we measure gravitational waves (LIGO) and precisely calibrate lengths.
  • Optical coherence tomography (OCT): Medical imaging of the retina — uses low-coherence interference.
  • Astronomical interferometry: Combine light from multiple telescopes to achieve extremely high resolution.
  • Anti-counterfeiting holograms: Interference-based holograms on credit cards, currency.
  • Spectroscopy: Determine the wavelength of light from stars, gases, materials.
Common Mistake

Mistake: "Fringe width increases when d increases."
Correction: Opposite! β = λD/d. Larger slit separation → SMALLER fringe width. Bring slits closer together for wider fringes.

Mistake: "Two independent light bulbs can produce interference."
Correction: Never. Ordinary sources are incoherent (random phase). You must use a single source split into two paths (like Young's setup) to get coherence.

Key Takeaway

Young's double slit: β = λD/d. Fringes equally spaced. Bright: x = nλD/d. Dark: x = (n+½)λD/d. Requires coherent sources. Basis of interferometry, OCT, spectroscopy, holograms.

Section 06

Diffraction

10.6Wave Bending Around Obstacles

When light passes through a narrow opening or around an obstacle, it spreads out — this is diffraction. It's why shadows aren't perfectly sharp and why you can hear around corners (sound diffracts more due to longer wavelength).

Single Slit Diffraction (from NCERT)

Slit width a, incident parallel light (wavelength λ). Observed intensity pattern on a screen at distance D (D ≫ a):

Minima (zero intensity): a sinθ = nλ (n = ±1, ±2, ...)

Secondary maxima (approximate): a sinθ ≈ (n + ½)λ

Central maximum is the brightest and widest. Width ≈ 2λ/a (in angle).

Fringe width of central max on screen: ≈ 2λD/a

V7 · Single slit diffraction — central bright + weaker fringes Incoming plane wave a Screen Central max 1st secondary 1st secondary Intensity a sinθ = nλ → dark fringes; central max = brightest
Key Formulas for Diffraction

Minima positions: a sinθ = nλ (n = ±1, ±2, ±3, ...)

Secondary maxima (approx.): a sinθ ≈ (n + ½)λ

Width of central maximum on screen: w = 2λD/a

Angular width: 2θ ≈ 2λ/a (for small θ, sinθ ≈ θ)

FeatureInterference (Young's)Diffraction (single slit)
SourceTwo coherent sourcesOne slit (many secondary sources)
Fringe widthAll equal (β = λD/d)Central max wider; secondary maxima narrower
IntensityAll bright fringes equal (4I₀)Intensity decreases away from centre
Dark fringesPath diff = (n+½)λa sinθ = nλ
Central fringeSame as othersTwice as wide, brightest
Real Life Connect
  • Rainbow colors on CD/DVD: Diffraction grating effect from tiny pits.
  • Diffraction-limited telescopes: Angular resolution ≈ 1.22 λ/D — limits how small a detail telescopes can see.
  • X-ray crystallography: X-rays diffract off atomic planes in crystals → determine molecular structures (DNA, proteins).
  • Sound around corners: You can hear conversations in the next room — sound has large wavelength so diffracts a lot.
  • Knife-edge shadows: Even a razor-sharp edge has faint diffraction fringes.
  • Blue sky: Rayleigh scattering is related to diffraction — short wavelengths scatter more.
Try This at Home (from NCERT)

Hold two razor blades together with a tiny slit between them. Look through the slit at a clear bulb filament (or at a distance). You'll see the single-slit diffraction pattern — a bright central band with fainter bands on either side. The fringes will be colored because the fringe spacing depends on wavelength (red wider than blue).

Interference vs Diffraction — Feynman's View

Richard Feynman said: "No one has ever been able to define the difference between interference and diffraction satisfactorily. It is just a question of usage. When there are only a few sources (say two), we call it interference. When there are many sources (like all the points on a slit), we call it diffraction."

Key Takeaway

Diffraction: light spreads around obstacles/slits. Single slit: a sinθ = nλ for minima. Central max is brightest and widest. Fringe width ∝ λD/a. Explains CD rainbows, telescope resolution limits, X-ray crystallography, sound around corners.

Section 07

Polarisation

10.7Proving Light Is a Transverse Wave

Light's electric field oscillates perpendicular to the direction of propagation. In natural (unpolarised) light, the E-field direction is random — takes all orientations. A polaroid filters it to one direction.

Polarisation Basics (from NCERT)

Unpolarised light: E-field oscillates randomly in all directions perpendicular to propagation.

Linearly polarised light: E-field oscillates in one plane.

Polaroid: A sheet with aligned long-chain molecules. It transmits only the E-field component parallel to its pass-axis; the perpendicular component is absorbed.

Through one polaroid: Intensity of unpolarised light drops to I₀/2 (half absorbed).

Malus's Law

When linearly polarised light of intensity I₀ passes through a polaroid at angle θ to its polarisation direction:

I = I₀ cos²θ

θ = angle between incident polarisation and polaroid axis.

Two crossed polaroids (θ = 90°): I = 0. Parallel (θ = 0°): I = I₀.

V8 · Polarisation — Malus's law with two polaroids Unpolarised P₁ Vertical pass Polarised I₀ P₂ Rotated by θ I = I₀cos²θ Malus's Law θ (degrees) I/I₀ 0° 45° 90° 135° 180° I = I₀cos²θ · half intensity at 45° · zero at 90° (crossed polaroids)
Analogy — Fence Through a Rope Wave

Imagine shaking a rope up-down (vertically) — that's a vertically polarised wave. Now pass the rope through a vertical fence — it goes through. But pass through a horizontal fence — the wave is blocked. Now shake the rope in random directions (unpolarised) — half the energy gets through any single fence, and after the fence the rope vibrates only in one direction (polarised). Polaroid works exactly like this fence for light.

Why Does Polarisation Prove Light Is Transverse?

Only transverse waves can be polarised. Sound waves (longitudinal) — air molecules move along the propagation direction — cannot be polarised. But light CAN be polarised. This is the decisive proof that the electric field oscillates PERPENDICULAR to the propagation direction.

Real Life Connect
  • Polarised sunglasses: Block the horizontally-polarised reflected light from water, road, and snow — reducing glare dramatically.
  • Polaroid camera filters: Photographers use them to darken skies, remove reflections from glass/water, enhance contrast.
  • 3D cinema glasses: Two projectors emit left- and right-circularly polarised images. Each lens passes only one — brain fuses them into 3D!
  • LCD screens: Use polarising filters + liquid crystals to control pixels.
  • Optical stress analysis: Transparent materials under stress become birefringent — reveal mechanical stress patterns.
  • Bee navigation: Bees detect the polarisation of scattered sunlight to orient themselves — a living compass!
  • Fishermen's sunglasses: Block water reflections so you can see below the surface.
Brewster's Angle (NCERT supplement)

There's also an angle called Brewster's angle (or polarising angle) at which light reflected from a transparent surface is completely polarised. For glass, tan θ_B = n ≈ 1.5 → θ_B ≈ 57°. Fishermen know this angle well — reflections at that angle are fully polarised.

Key Takeaway

Polarisation proves light is a transverse wave. Unpolarised light through one polaroid → half intensity, linearly polarised. Two polaroids: Malus's law I = I₀cos²θ. Crossed → zero. Basis of 3D glasses, LCDs, sunglasses, stress analysis, and bee navigation.

Practice

📝 Solved Examples from NCERT

📋 NCERT Example 10.1

Q1. Monochromatic light from a laser has frequency 6.0×10¹⁴ Hz. (a) What is the wavelength in air? (b) In water (n = 1.33)? (c) What happens to frequency and speed?

Given ½ Mark

ν = 6.0×10¹⁴ Hz, c = 3×10⁸ m/s, n_water = 1.33

(a) Wavelength in air 1 Mark

λ_air = c/ν = (3×10⁸)/(6×10¹⁴) = 5×10⁻⁷ m = 500 nm

(b) Wavelength in water 1 Mark

v_water = c/n = 3×10⁸/1.33 = 2.26×10⁸ m/s

λ_water = v_water/ν = 2.26×10⁸ / 6×10¹⁴ = 3.76×10⁻⁷ m ≈ 376 nm

(c) What stays same? ½ Mark

Frequency ν is UNCHANGED. Speed and wavelength decrease in water (both by factor n).

λ_air = 500 nm, λ_water ≈ 376 nm, ν unchanged
📋 NCERT Example 10.2

Q2. A polaroid sheet is rotated between two crossed polaroids. What is the intensity of transmitted light as a function of rotation angle θ?

Setup ½ Mark

P₁ and P₃ are crossed (90° apart). P₂ is between them, rotated by θ from P₁'s pass-axis.

Through P₁ ½ Mark

Let intensity after P₁ = I₀ (polarised along P₁'s axis)

Through P₂ 1 Mark

Angle between P₁ and P₂ = θ → intensity after P₂ = I₀cos²θ

Through P₃ 1 Mark

Angle between P₂ and P₃ = (90° − θ) → intensity after P₃ = I₀cos²θ · cos²(90°−θ) = I₀cos²θ sin²θ

Using 2sinθcosθ = sin2θ: I = I₀ sin²(2θ)/4

Maximum ½ Mark

Maximum at θ = 45° (sin²(90°) = 1) → I = I₀/4

I = (I₀/4) sin²(2θ), max at θ = 45° → I = I₀/4
📋 3 Marks

Q3. In Young's experiment, slits separated by 0.5 mm, screen 1 m away. Light of 600 nm. Find the fringe width and position of 3rd bright fringe.

Given ½ Mark

d = 0.5×10⁻³ m, D = 1 m, λ = 600×10⁻⁹ m

Fringe width 1 Mark

β = λD/d = (600×10⁻⁹ × 1)/(0.5×10⁻³)

= 600×10⁻⁹ / (5×10⁻⁴) = 1.2×10⁻³ m = 1.2 mm

3rd bright fringe 1 Mark

x₃ = 3β = 3 × 1.2 = 3.6 mm from center

Comment ½ Mark

Fringe spacing is easily visible to the naked eye (~mm scale) — that's why Young's experiment is so convincing.

β = 1.2 mm, x₃ = 3.6 mm
📋 3 Marks

Q4. Light of wavelength 589 nm is incident on a single slit of width 0.2 mm. Find the angular width of the central maximum.

Given ½ Mark

λ = 589×10⁻⁹ m, a = 0.2×10⁻³ m

Angular position of first minimum 1 Mark

a sinθ = λ → θ ≈ λ/a (small angle)

θ = 589×10⁻⁹ / 0.2×10⁻³ = 2.945×10⁻³ rad ≈ 0.169°

Angular width of central max 1 Mark

2θ = 2 × 0.169° ≈ 0.337°

Or 2θ ≈ 2λ/a = 5.89×10⁻³ rad

Comment ½ Mark

Narrow central max — expected for small slit width. Wider slit → narrower diffraction pattern.

Angular width ≈ 0.337° (or ≈ 5.89×10⁻³ rad)
📋 3 Marks

Q5. Unpolarised light of intensity I₀ passes through two polaroids. If the angle between their axes is 60°, find the final intensity.

Through first polaroid 1 Mark

Unpolarised light → polarised light, I₁ = I₀/2

Through second (Malus) 1 Mark

I₂ = I₁ cos²θ = (I₀/2) cos²(60°) = (I₀/2)(1/4) = I₀/8

Comment 1 Mark

So only 1/8 of the original intensity makes it through both. At 60°, the polaroids let through a moderate amount of light. Crossed polaroids (90°) would let through zero.

I_final = I₀/8 (12.5% transmission)
📋 4 Marks

Q6. Light from two coherent sources (both at 500 nm) has path difference at a point of (a) 500 nm, (b) 250 nm, (c) 750 nm. State whether that point is bright or dark.

(a) Path diff = 500 nm = λ 1 Mark

Path difference = 1 × λ → Constructive → bright

(b) Path diff = 250 nm = λ/2 1 Mark

Path difference = (0 + ½)λ → Destructive → dark

(c) Path diff = 750 nm = 1.5λ 1 Mark

Path difference = (1 + ½)λ → Destructive → dark

General rule 1 Mark

Bright: path diff = nλ (integer multiples). Dark: path diff = (n+½)λ (half-integer multiples).

(a) Bright, (b) Dark, (c) Dark
Quick Reference

📐 Complete Formula Sheet

Chapter 10 — All Formulas on One Page

Wavefront Speed
v = νλ
Refractive Index
n = c/v = λ_vacuum/λ_medium
Snell's Law (Huygens)
sin i / sin r = v₁/v₂ = n₂/n₁
Interference Condition
Constructive: Δx = nλ, Destructive: Δx = (n+½)λ
Resultant Intensity
I = 4I₀ cos²(φ/2)
Phase Difference
φ = (2π/λ) × path difference
Young's Fringe Position
Bright: x = nλD/d, Dark: x = (n+½)λD/d
Fringe Width
β = λD/d
Single Slit Minima
a sinθ = nλ (n = ±1, ±2, ...)
Single Slit Maxima (approx)
a sinθ ≈ (n+½)λ
Central Max Width
w ≈ 2λD/a
Angular Width (central)
2θ ≈ 2λ/a
Malus's Law
I = I₀ cos²θ
Unpolarised Through Polaroid
I = I₀/2
Brewster's Angle
tan θ_B = n
Constants
c = 3×10⁸ m/s, visible λ: 400–700 nm

📖 Notation Key

λWavelength (m or nm)
νFrequency (Hz)
vSpeed in medium (m/s)
nRefractive index
dSlit separation (Young's)
aSlit width (single slit)
DDistance to screen
βFringe width
θAngle (diffraction or polaroid)
I, I₀Intensity, peak intensity
φPhase difference
ΔxPath difference
Test Yourself

✍️ MCQ Practice

Score: 0 / 12
New Pattern

🎯 Assertion–Reason

(A) Both true, R explains A. (B) Both true, R does NOT explain A. (C) A true, R false. (D) A false, R true.

Score: 0 / 6