From Einstein's photon to de Broglie's matter waves — with animated photoelectric effect, photon concept visualization, interactive photoelectric simulator, and 20+ real-life examples.
Before diving in, here's the entire chapter on one page. This is your mental map — every topic is a link in this chain.
Electrons are emitted from metals when given enough energy (work function). Light causes emission — but only if its frequency exceeds a threshold. Wave theory fails to explain this, but Einstein's photon picture succeeds. And by symmetry, de Broglie proposed that matter also has waves — verified experimentally!
In 1897, J.J. Thomson — studying electric discharge through gases — showed that atoms of all elements contain identical negatively charged particles. He named them electrons.
J.J. Thomson (1897): Discovered the electron via cathode ray experiments. Found the specific charge e/m = 1.76×10¹¹ C/kg, independent of the gas or metal used — meaning electrons are universal.
R.A. Millikan (1913): Oil-drop experiment measured electron charge precisely: e = 1.602×10⁻¹⁹ C. Also confirmed that charge is quantised.
Combining these: mass of electron m = e / (e/m) = 9.11×10⁻³¹ kg.
Electrons are universal negatively charged particles found in all atoms. e = 1.6×10⁻¹⁹ C, m = 9.11×10⁻³¹ kg. Charge is quantised.
Metals have free electrons that conduct electricity — but they're trapped inside. To escape, they need energy to overcome the attractive force of the positive ions. The minimum energy needed is called the work function.
The minimum energy required to pull an electron out of a metal surface. Depends on the metal and its surface condition.
Measured in electron volts (eV): 1 eV = 1.602×10⁻¹⁹ J.
Typical values: Cs ≈ 2.14 eV, Na ≈ 2.28 eV, Zn ≈ 4.3 eV, Cu ≈ 4.65 eV, Pt ≈ 5.65 eV.
Work function φ₀ = minimum energy to free an electron. Three methods: thermal (heat), field (strong E), photoelectric (light). Photoelectric is the one that revealed the quantum nature of light!
While studying electromagnetic waves, Heinrich Hertz noticed something unexpected: a spark across a gap was brighter when the metal electrode was illuminated by ultraviolet light. Light was somehow helping electrons escape!
This was the first observation of the photoelectric effect — emission of electrons when light of suitable frequency hits a metal surface.
When UV light falls on a zinc plate (negatively charged), it loses charge. When UV is stopped, charge loss stops.
Key finding: If the incident light's frequency is below a certain threshold frequency (ν₀), NO emission occurs — no matter how intense the light!
Different metals have different threshold frequencies. Alkali metals (Li, Na, K, Cs, Rb) respond to visible light; most others need UV.
Photoelectric effect: light ejects electrons from metal surface. Only if frequency ≥ threshold (depends on metal). Below threshold → no emission regardless of intensity. This discovery puzzled physicists for years!
Philipp Lenard (1902) set up a clean experiment: a photosensitive metal plate (emitter C) and a collector plate (A) inside an evacuated tube. Monochromatic light of adjustable frequency and intensity is shined on C. The voltage between A and C can be varied (including polarity reversal).
Keeping frequency and accelerating potential fixed, increase the light intensity → photocurrent increases linearly.
Photocurrent ∝ Intensity of light
Why? More intense light = more photons hitting per second = more electrons emitted per second.
But: the maximum kinetic energy of electrons is UNCHANGED by intensity.
Now vary the applied voltage. When A is positive, electrons accelerate → current saturates. When A is negative, electrons are repelled — a stopping potential V₀ exists below which no current flows.
The minimum retarding potential needed to stop even the fastest electrons from reaching the collector.
eV₀ = K_max = ½mv_max²
Key point: V₀ depends on frequency (and material) but NOT on intensity.
Now change frequency at fixed intensity. Higher frequency → more negative stopping potential → faster electrons!
eV₀ = hν − φ₀
So: V₀ = (h/e)ν − φ₀/e
Straight line! Slope = h/e (universal constant), x-intercept = ν₀ = φ₀/h.
| Observation | Meaning |
|---|---|
| (i) Photocurrent ∝ intensity (for ν > ν₀) | More photons → more electrons |
| (ii) Stopping potential independent of intensity | Each photon has fixed energy hν |
| (iii) Below ν₀, no emission at any intensity | Photon must have enough energy to overcome φ₀ |
| (iv) Emission is instantaneous (<10⁻⁹ s) | Single-photon absorption event — no "build-up" time |
Photocurrent ∝ intensity. Stopping potential ∝ frequency (not intensity). Threshold frequency ν₀ exists for each metal. Emission is instantaneous. These facts mystified physicists until Einstein!
The wave theory of light (Maxwell, 1865) had been spectacularly successful — it explained interference, diffraction, polarisation. But it utterly failed for the photoelectric effect.
| Prediction (wave theory) | Reality (experiment) |
|---|---|
| More intensity → more energy per electron → higher K_max | K_max is INDEPENDENT of intensity! |
| Any frequency should work given enough intensity/time | Below threshold frequency ν₀ → NO emission, ever! |
| Continuous absorption requires time to build up energy | Emission is instantaneous (<10⁻⁹ s)! |
According to wave theory, light energy is spread continuously over the wavefront. Each electron absorbs energy gradually. With enough time (or intensity), ANY electron should gain enough energy to escape. But experiments show no emission below ν₀, and emission is instantaneous.
Explicit calculation: with a weak UV light, wave theory predicts it would take HOURS for an electron to accumulate enough energy. But experiments show emission in nanoseconds!
Imagine throwing water at a wall. Big waves (intense) push hard but the wall doesn't move — the pressure is spread. Now imagine throwing a brick (single concentrated impact). If the brick hits hard enough (high frequency = high energy per hit), it breaks through. Wave theory was the "torrent" picture — Einstein's photon was the "brick" picture.
Wave theory predicted wrong things: K_max should increase with intensity, no threshold frequency, delay in emission. Reality: K_max independent of intensity, threshold frequency exists, emission is instantaneous. A revolution was needed — and Einstein provided it.
In 1905, Einstein proposed a radical idea: light energy comes in discrete packets (quanta) called photons. Each photon carries energy E = hν. One photon interacts with one electron — all-or-nothing.
K_max = hν − φ₀
Where:
Equivalently: eV₀ = hν − φ₀ (V₀ = stopping potential)
For emission to occur, hν must exceed φ₀. Threshold frequency:
ν₀ = φ₀ / h
Below ν₀: no emission, no matter the intensity.
Wavelength threshold: λ₀ = hc/φ₀ = 1240 nm·eV / φ₀(eV)
| Observation | Explanation |
|---|---|
| K_max independent of intensity | Each photon has energy hν (fixed by frequency). Intensity = number of photons, not their energy. |
| Photocurrent ∝ intensity | More photons → more electrons emitted |
| Threshold frequency ν₀ exists | If hν < φ₀, electron can't escape — no emission regardless of intensity |
| Instantaneous emission | Single photon-electron collision; no build-up time |
| Stopping potential ∝ frequency | V₀ = (h/e)ν − φ₀/e → linear |
Mistake: "More intense light gives electrons more energy."
Correction: More intensity = more photons = more electrons, but each electron still gets only hν energy. K_max depends on frequency, not intensity.
Mistake: "K_max = hν for all electrons."
Correction: K_max is the MAXIMUM kinetic energy. Electrons deeper in the metal lose more energy escaping — they emerge with less than K_max.
Mistake: "Below ν₀, just wait longer — emission will happen."
Correction: Never. Each photon has less energy than φ₀, so no electron can escape no matter how many photons hit. It's all-or-nothing at the single-photon level.
Einstein's equation: hν = φ₀ + K_max = φ₀ + eV₀. Threshold: ν₀ = φ₀/h. Explains ALL observations. Light is quantised into photons of energy hν. Nobel Prize 1921.
The photoelectric effect showed that light interacts with matter as if it's made of tiny packets. Einstein's 1905 paper proposed that each packet — later named a photon — has definite energy AND momentum.
Energy: E = hν = hc/λ
Momentum: p = h/λ = hν/c = E/c
Speed: c = 3×10⁸ m/s (always)
Rest mass: zero (photons exist only in motion)
Charge: zero (not deflected by E or B fields)
All photons of a given frequency have the same energy, regardless of intensity. Intensity determines the number of photons, not their individual energy.
Before 1905, everyone thought light was a continuous wave. Einstein showed it comes in quanta — like bullets of specific energy. This was the birth of quantum mechanics. Niels Bohr said: "Einstein's photon was the most revolutionary idea in physics."
Photon: E = hν = hc/λ, p = h/λ. Zero rest mass, always travels at c, no charge. Energy is quantised, not continuous. Intensity = number of photons. Higher frequency = more energetic photons = more damaging.
By 1924, light was known to have both wave AND particle nature (duality). Louis de Broglie asked a daring question: If light has both, why not matter?
By symmetry, if radiation behaves like particles (photons), then particles should behave like waves.
A particle with momentum p has an associated wavelength:
λ = h/p = h/(mv)
Where:
This wavelength is called the de Broglie wavelength or matter wave wavelength.
Electron accelerated through voltage V:
λ = h/√(2meV) ≈ 1.23 nm / √(V in volts)
Example: V = 100 V → λ ≈ 0.123 nm (X-ray scale!)
Thermal neutron: λ ≈ 0.18 nm at room temp
Macroscopic objects: λ ≈ 10⁻³⁴ m (utterly unmeasurable)
Because h = 6.626×10⁻³⁴ J·s is incredibly small. For a cricket ball (0.16 kg at 20 m/s):
λ = 6.6×10⁻³⁴ / (0.16 × 20) ≈ 2×10⁻³⁴ m
That's 10²⁰ times smaller than an atom — impossible to detect.
Only for tiny particles (electrons, protons, atoms), where m is small, does λ become measurable (nanometers).
Mistake: "de Broglie wavelength is only for photons."
Correction: The formula λ = h/p applies to ALL particles — electrons, protons, atoms, even cricket balls. It's just that for macroscopic objects, λ is unmeasurably small.
Mistake: "Faster particle → longer wavelength."
Correction: Opposite! λ = h/p = h/(mv). Faster (bigger p) → SHORTER wavelength. A speeding bullet has a smaller λ than a slow one.
de Broglie: λ = h/p = h/(mv). Applies to ALL particles. Electrons accelerated through V have λ ≈ 1.23/√V nm. Macroscopic objects have unmeasurably small λ. Verified by Davisson-Germer (1927). Basis of electron microscopy, neutron diffraction, quantum tunneling. Nobel 1929.
Q1. Monochromatic light of frequency 6.0×10¹⁴ Hz is produced by a laser. Power emitted is 2.0×10⁻³ W. (a) Energy of a photon? (b) Photons emitted per second?
ν = 6.0×10¹⁴ Hz, P = 2.0×10⁻³ W, h = 6.63×10⁻³⁴ J·s
E = hν = 6.63×10⁻³⁴ × 6.0×10¹⁴ = 3.98×10⁻¹⁹ J ≈ 2.49 eV
N = P/E = (2.0×10⁻³)/(3.98×10⁻¹⁹) = 5.0×10¹⁵ photons/second
Even a milliwatt laser emits 5 million billion photons per second — why photon statistics work so well for intensity.
Q2. Work function of caesium is 2.14 eV. Find (a) threshold frequency, (b) wavelength of incident light if photocurrent is stopped by V₀ = 0.60 V.
ν₀ = φ₀/h = (2.14 × 1.6×10⁻¹⁹)/(6.63×10⁻³⁴)
= 3.424×10⁻¹⁹ / 6.63×10⁻³⁴ = 5.16×10¹⁴ Hz
eV₀ = hc/λ − φ₀
λ = hc / (eV₀ + φ₀)
= (6.63×10⁻³⁴ × 3×10⁸) / ((0.60 + 2.14) × 1.6×10⁻¹⁹)
= 1.989×10⁻²⁵ / (2.74 × 1.6×10⁻¹⁹) = 1.989×10⁻²⁵ / 4.384×10⁻¹⁹
= 4.54×10⁻⁷ m = 454 nm
454 nm is blue-violet visible light — consistent with Cs being sensitive to visible light.
Q3. Find de Broglie wavelength of (a) electron at 5.4×10⁶ m/s, (b) ball (mass 150 g) at 30 m/s.
m = 9.11×10⁻³¹ kg, v = 5.4×10⁶ m/s
p = mv = 9.11×10⁻³¹ × 5.4×10⁶ = 4.92×10⁻²⁴ kg·m/s
λ = h/p = 6.63×10⁻³⁴ / 4.92×10⁻²⁴ = 1.35×10⁻¹⁰ m = 0.135 nm
Comparable to X-ray wavelengths!
m = 0.15 kg, v = 30 m/s
p = 0.15 × 30 = 4.5 kg·m/s
λ = 6.63×10⁻³⁴ / 4.5 = 1.47×10⁻³⁴ m
Utterly unmeasurable — ~10⁻¹⁹ times smaller than a proton!
Wave nature of matter is only measurable for tiny particles (electrons, protons, atoms).
Q4. Light of wavelength 400 nm falls on a metal with work function 2.0 eV. Find (a) photon energy in eV, (b) maximum kinetic energy of photoelectrons, (c) stopping potential.
E = hc/λ = 1240 eV·nm / 400 nm = 3.1 eV
(Using shortcut hc = 1240 eV·nm)
K_max = E − φ₀ = 3.1 − 2.0 = 1.1 eV
eV₀ = K_max → V₀ = K_max/e = 1.1 V
Q5. The threshold frequency for a metal is 3.3×10¹⁴ Hz. Light of frequency 8.2×10¹⁴ Hz is incident. Find the cut-off (stopping) voltage.
hν = 6.63×10⁻³⁴ × 8.2×10¹⁴ = 5.44×10⁻¹⁹ J
In eV: 5.44×10⁻¹⁹ / 1.6×10⁻¹⁹ = 3.40 eV
φ₀ = hν₀ = 6.63×10⁻³⁴ × 3.3×10¹⁴ / 1.6×10⁻¹⁹ = 1.37 eV
V₀ = (hν − φ₀)/e = 3.40 − 1.37 = 2.03 V
Q6. An electron is accelerated through a potential of 100 V. Find its de Broglie wavelength.
K = eV = 100 eV = 100 × 1.6×10⁻¹⁹ = 1.6×10⁻¹⁷ J
p = √(2mK) = √(2 × 9.11×10⁻³¹ × 1.6×10⁻¹⁷)
= √(2.915×10⁻⁴⁷) = 5.4×10⁻²⁴ kg·m/s
λ = h/p = 6.63×10⁻³⁴ / 5.4×10⁻²⁴
= 1.23×10⁻¹⁰ m = 0.123 nm
λ = 1.23 nm / √V = 1.23/√100 = 0.123 nm ✓
| h | Planck's constant (6.626×10⁻³⁴ J·s) |
| ν | Frequency (Hz) |
| λ | Wavelength (m) |
| φ₀ | Work function (J or eV) |
| ν₀ | Threshold frequency |
| K_max | Maximum kinetic energy (J or eV) |
| V₀ | Stopping potential (V) |
| m | Mass of particle (kg) |
| v | Speed of particle (m/s) |
| p | Momentum (kg·m/s) |
| e | Electron charge (1.6×10⁻¹⁹ C) |
(A) Both true, R explains A. (B) Both true, R does NOT explain A. (C) A true, R false. (D) A false, R true.