From the magnet that guided sailors to the MRI that scans your brain — with deep explanations, 20+ real-life examples, 3D diagrams, an interactive magnetic materials simulator, exam traps and a printable formula sheet.
Before diving into individual sections, here's the entire chapter on one page. Use this as a mental map — every topic is a link in this chain.
A bar magnet is really a collection of current loops (Ampere's idea). Magnetic field lines form closed loops — no monopoles exist. Materials respond to external fields differently: dia (weak repel), para (weak attract), ferro (strong attract) — this is the material side of magnetism.
The word "magnet" comes from Magnesia, an ancient Greek region where natural magnetic ore (lodestone, Fe₃O₄) was found as early as 600 BC. For 2000+ years, magnets were a curiosity — until 1820, when Oersted discovered that currents make magnetic fields. Suddenly, permanent magnets made sense: they're just collections of tiny current loops at the atomic level.
Bar magnets have N and S poles, no monopoles. Breaking a magnet always gives two smaller magnets. Magnetism is fundamentally due to current loops (atoms, electrons). This is Ampere's insight — a bar magnet is just a big collection of current loops.
Sprinkle iron filings on a glass plate above a bar magnet — they arrange into beautiful curves. These are the magnetic field lines — visualisations of the magnetic field vector B.
Mistake: "Magnetic field lines start at north pole and end at south pole."
Correction: They are continuous closed loops — outside the magnet they go N→S, but inside they go S→N. They don't "start" or "end" anywhere. This is because there's no magnetic charge (monopole) to act as source/sink.
Mistake: "Like electric field lines, magnetic field lines diverge from a point."
Correction: Never! Magnetic field lines always close. A diverging field line would imply a source (a monopole) — which doesn't exist.
Magnetic field lines form closed loops (N→S outside, S→N inside). They never intersect, never start or end at a point. Density ∝ field strength. The closed-loop property is a direct consequence of the non-existence of magnetic monopoles.
Compare the field lines of a bar magnet and a current-carrying solenoid. They're identical! This was Ampere's insight: every magnet is really a collection of current loops — one big loop per atom (from electrons orbiting nuclei and their intrinsic spin).
The magnetic moment of a bar magnet equals the magnetic moment of a solenoid producing the same far field:
At axial point (distance r ≫ l from centre):
Baxial = (μ₀/4π) · 2m/r³
Where m = magnetic moment of the magnet. This is the same as the field of a current loop with m = NIA.
| Position | Field B | Direction |
|---|---|---|
| On axis (distance r from centre) | B = (μ₀/4π) · 2m/r³ | Along m (from S to N inside) |
| On equatorial line | B = −(μ₀/4π) · m/r³ | Opposite to m |
Note the parallel with the electric dipole: Eaxial = 2p/4πε₀r³, Eeq = −p/4πε₀r³. Just replace p → m and 1/ε₀ → μ₀.
Think of a bar magnet as a family of tiny electromagnets (atoms) all pointing the same way. A solenoid is one big visible current loop. A bar magnet is trillions of microscopic loops. Both produce the same kind of field — that's why they have identical field patterns.
Because the field lines exit one end (north) and re-enter the other (south). The right-hand rule tells you which is which: curl your fingers in the direction of current flow, and your thumb points toward the North pole. Reversing the current flips the magnet.
A bar magnet is equivalent to a solenoid. Magnetism = current loops (atoms = tiny loops). Field of bar magnet: 2m/r³ on axis, −m/r³ on equator. Ampere's insight unified magnetism and electricity!
Place a bar magnet in a uniform external magnetic field B. The net force is zero (both poles feel equal forces in opposite directions) — but there's a torque.
τ = m × B | |τ| = mB sinθ
Where θ = angle between m (magnetic moment, S→N inside the magnet) and B.
The torque tends to align m with B.
U = −m·B = −mB cosθ
Mistake: "Net force on a magnet in uniform field is mB."
Correction: Net force = zero. Both poles feel equal forces in opposite directions. Only torque acts.
Mistake: "The magnet's north pole always points to Earth's geographic North."
Correction: The magnet's north pole points to Earth's magnetic South pole — which happens to be located near geographic North. This is why the needle "points north" — the north-seeking end of the needle is attracted to the south magnetic pole near Earth's north.
Torque on a bar magnet: τ = m × B = mB sinθ. Potential energy: U = −mB cosθ. Aligned with B = stable (min energy). Anti-aligned = unstable. This underlies compasses, MRI, LCDs, and magnetic manipulation of nanoparticles.
The electric Gauss's law says flux through a closed surface ∝ enclosed charge. For magnetism, the situation is different:
∮ B · dS = 0 (for any closed surface)
Net magnetic flux through any closed surface is always zero. As many field lines enter as exit.
Meaning: No magnetic monopoles exist. You can't have a "magnetic charge" that acts as a source or sink of B-field.
Compare with electric Gauss's law: ∮E·dS = qenc/ε₀. There, charge qenc can be nonzero — electric monopoles exist. For magnetism, the RHS is always zero. This is a fundamental statement about the universe: magnetic monopoles don't exist (or if they do, they're extremely rare and haven't been observed).
This fact also explains why magnetic field lines are always closed loops — they can't have a "start" or "end" without a monopole source.
Mistake: "There are no north and south magnetic charges, but there are north and south poles."
Correction: Poles ARE the labels we give to the ends of a magnet. But there's no isolated "magnetic charge" at a pole — the field at a pole is due to all the current loops inside the magnet, not a localised "charge". The pole is a place where field lines converge — but they continue through the magnet.
Gauss's law for magnetism: ∮B·dS = 0. Net magnetic flux through any closed surface is zero — no monopoles. This is why B-field lines always form closed loops. One of Maxwell's four equations!
Earth behaves like a giant bar magnet — but with a twist: Earth's magnetic North pole is actually near its geographic South. This is why a compass needle's N pole points toward geographic North: it's attracted to Earth's magnetic South pole, which is located near the geographic North!
Three quantities describe Earth's magnetic field at any location:
Earth's magnetic field is not from a bar magnet at the core. It comes from the geodynamo — convection currents of molten iron in the outer core. The flow of liquid metal generates the field via electromagnetic induction (a "self-exciting dynamo"). This is why the field drifts over time (currently moving westward by ~50 km/year).
Earth = giant magnet with tilt. Magnetic S pole near geographic N. Three parameters: declination (D), dip (δ), horizontal component B_H. Field generated by geodynamo in outer core — not a permanent magnet. Poles have reversed many times. Protects us via Van Allen belts.
When you put a material in an external magnetic field, its atomic dipoles partially align. This creates an additional internal field. Three quantities describe this:
Magnetisation M: Net magnetic moment per unit volume. Units: A/m.
Magnetic intensity H (or magnetic field strength): H = B/μ₀ − M. Units: A/m.
Magnetic susceptibility χ: M = χH. Dimensionless.
Together: B = μ₀(H + M) = μ₀(1 + χ)H = μ₀μ_r H
Where μ_r = 1 + χ is the relative permeability. And μ = μ₀μ_r is the absolute permeability.
| Parameter | Meaning | Value |
|---|---|---|
| χ (susceptibility) | How much material magnetises in response to H | Small + (para), small − (dia), large + (ferro) |
| μ_r (relative perm.) | Factor by which the material "amplifies" B | μ_r = 1 + χ. Always ≈ 1 for dia/para, ≫ 1 for ferro |
| μ (absolute perm.) | μ₀ × μ_r | Material's actual permeability |
B is the actual magnetic field (in tesla) — the physical quantity that exerts forces on currents and charges. H is a derived quantity (in A/m) representing the "driving" external field. In vacuum, B = μ₀H. Inside a material, B = μ₀(H+M) — the material's response M adds to the applied H. H is sometimes called the "magnetic field intensity" or "magnetising field".
B = μ₀(H + M) = μ₀μ_r H. Magnetisation M measures how much the material aligns with H. Susceptibility χ = M/H; permeability μ_r = 1 + χ. High χ = strongly magnetic material (like iron). This is how materials "amplify" magnetic fields — the basis of electromagnets and MRI contrast agents.
Depending on their atomic structure and electron configuration, materials respond very differently to external magnetic fields. Three main classes:
| Type | χ | μ_r | Behaviour | Examples |
|---|---|---|---|---|
| Diamagnetic | small negative (−10⁻⁵) | slightly < 1 | Weakly REPELLED by magnets. Field lines bend away. | Bismuth, copper, gold, water, graphite, most organic compounds |
| Paramagnetic | small positive (+10⁻⁵) | slightly > 1 | Weakly ATTRACTED. Field lines bend toward. | Aluminium, platinum, oxygen, titanium, many salts |
| Ferromagnetic | large positive (10²–10⁵) | ≫ 1 | Strongly ATTRACTED. Can become permanently magnetised. | Iron, cobalt, nickel, gadolinium, some alloys (Alnico, NdFeB) |
| Type | Atomic origin | What happens in external field |
|---|---|---|
| Diamagnetic | All electrons paired → no net magnetic moment per atom | External field induces tiny opposite moments (Lenz's law). Weakly opposes field. Present in ALL materials (but usually masked). |
| Paramagnetic | Unpaired electrons → small net moment per atom | Moments try to align with field, but thermal agitation disrupts. Weak alignment. χ ∝ 1/T (Curie's law). |
| Ferromagnetic | Unpaired electrons, plus strong quantum exchange coupling that aligns neighbouring spins → magnetic domains (~10⁹ atoms each!) | Domains align with field, growing at the expense of misaligned ones. Saturation achieved. χ very large. Permanent magnetisation possible. |
Trap: "Increasing temperature increases magnetisation."
Correction: For paramagnets, χ ∝ 1/T — magnetisation DECREASES with temperature (Curie's law). For ferromagnets, there's a critical temperature (Curie temperature, e.g., 770°C for iron) above which ferromagnetism is destroyed and the material becomes paramagnetic. Heat actually destroys magnetisation — that's why you shouldn't put magnets near a fire.
Three material classes: Diamagnetic (χ small −, weakly repelled, e.g., Bi, water), Paramagnetic (χ small +, weakly attracted, e.g., Al, O₂), Ferromagnetic (χ large +, strongly attracted, can be permanent, e.g., Fe, Co, Ni). Ferromagnetism comes from aligned magnetic domains; destroyed above Curie temperature.
Q1. A bar magnet has a magnetic moment of 1.5 A·m². Calculate the torque on it when placed in a uniform field of 0.2 T, with its axis making 30° with the field.
m = 1.5 A·m², B = 0.2 T, θ = 30°
τ = mB sinθ
τ = 1.5 × 0.2 × sin(30°)
= 0.3 × 0.5 = 0.15 N·m
Q2. A bar magnet has magnetic moment 0.4 A·m². Find the magnetic field on its axis at 20 cm from the centre.
m = 0.4 A·m², r = 0.2 m
Baxial = (μ₀/4π)(2m/r³)
B = (10⁻⁷)(2 × 0.4)/(0.2)³
= (10⁻⁷ × 0.8)/0.008
= 10⁻⁷ × 100
= 1 × 10⁻⁵ T
Along the magnetic moment (from S to N inside the magnet).
Q3. A short bar magnet produces a field of 8×10⁻⁵ T at a point on its axis, 10 cm from its centre. Find the magnetic moment.
B = 8×10⁻⁵ T, r = 0.1 m, on axis
B = (μ₀/4π)(2m/r³) → m = B·r³/(2×10⁻⁷)
m = (8×10⁻⁵ × (0.1)³)/(2×10⁻⁷)
= (8×10⁻⁵ × 10⁻³)/(2×10⁻⁷)
= (8×10⁻⁸)/(2×10⁻⁷)
= 0.4 A·m²
B × r³ / μ₀ has units (T·m³)/(T·m/A) = A·m². ✓
Q4. A solenoid of 1000 turns/m carries a current of 2 A. It has a soft iron core with relative permeability 500. Find the magnetic field inside.
n = 1000 m⁻¹, I = 2 A, μ_r = 500
B₀ = μ₀nI
= 8π×10⁻⁴ ≈ 2.51×10⁻³ T
B = μ_r × B₀ = 500 × 2.51×10⁻³
= 1.256 T
Iron core amplifies field 500× — that's why electromagnets use iron cores!
Q5. A material has magnetisation M = 2×10⁵ A/m in an external field H = 4×10⁵ A/m. Find the susceptibility, relative permeability, and total B field.
M = 2×10⁵ A/m, H = 4×10⁵ A/m
χ = M/H = 2×10⁵/4×10⁵ = 0.5
μ_r = 1 + χ = 1.5
B = μ₀μ_r H = (4π×10⁻⁷)(1.5)(4×10⁵)
= 4π×10⁻⁷ × 6×10⁵
= 24π×10⁻²
≈ 0.754 T
χ = 0.5 is moderately positive — paramagnetic (or weakly ferromagnetic). Not strong like iron (χ ~ thousands).
Q6. The horizontal component of Earth's magnetic field at a place is 3×10⁻⁵ T and the angle of dip is 60°. Find the total field and its vertical component.
BH = 3×10⁻⁵ T, δ = 60°
BH = B cos δ → B = BH/cos δ = 3×10⁻⁵/0.5 = 6×10⁻⁵ T
BV = B sin δ = 6×10⁻⁵ × 0.866 = 5.196×10⁻⁵ T
BH² + BV² = (9 + 27)×10⁻¹⁰ = 36×10⁻¹⁰ → B = 6×10⁻⁵ ✓
Q7. Compare dia-, para-, and ferromagnetic materials in terms of χ, μ_r, and typical behaviour.
χ small negative (~ −10⁻⁵), μ_r slightly < 1. Weakly repelled. Examples: Bi, Cu, H₂O. No permanent dipole — induced moments oppose field.
χ small positive (~ +10⁻⁵), μ_r slightly > 1. Weakly attracted. Examples: Al, Pt, O₂. Permanent atomic dipoles that partially align with field, disrupted by thermal motion (χ ∝ 1/T).
χ large positive (10² – 10⁵), μ_r ≫ 1. Strongly attracted, can become permanent magnets. Examples: Fe, Co, Ni. Magnetic domains align cooperatively; destroyed above Curie temperature.
| m | Magnetic dipole moment (A·m²) |
| B | Magnetic field (tesla, T) |
| H | Magnetic intensity (A/m) |
| M | Magnetisation (A/m) |
| χ | Susceptibility (dimensionless) |
| μ₀ | Permeability of free space = 4π×10⁻⁷ T·m/A |
| μ_r | Relative permeability = 1+χ |
| μ | Absolute permeability = μ₀μ_r |
| τ | Torque (N·m) |
| U | Potential energy (J) |
| δ | Angle of dip (degrees) |
| D | Angle of declination (degrees) |
| B_H, B_V | Horizontal, vertical components of Earth's field |
(A) Both true, R explains A. (B) Both true, R does NOT explain A. (C) A true, R false. (D) A false, R true.