Home/ Physics/ Chapter 9 — Ray Optics and Optical Instruments
Class 12 Physics · Chapter 9 · Rebuilt from NCERT

Ray Optics and Optical Instruments

From your mirror selfie to the giant telescopes that peer at distant galaxies — with NCERT-based deep explanations, animated light rays, interactive lens simulator, and 20+ real-life examples.

7Sections
20+Real-life Examples
12Diagrams
1Simulator
The Big Picture

🗺️ How Everything Connects

Before diving in, here's the entire chapter on one page. This is your mental map — every topic is a link in this chain.

Reflection Spherical mirrors Refraction Snell's law Total Internal Reflection Lenses Lens formula Prism Dispersion Optical Instruments Human eye Fiber optics Rainbow "Light control + imaging" Nature's own optics
Key Takeaway

Light reflects (mirror equation), refracts (Snell's law), and can be trapped inside dense media (TIR). Lenses use refraction to focus light, prisms disperse it into colors, and optical instruments (microscopes, telescopes) combine these effects to let us see tiny or distant objects. Even your eye is an optical instrument!

Section 01

Introduction — Light and Ray Optics

9.1The Simplest Picture of Light

Light is an electromagnetic wave (Chapter 8) with a tiny wavelength — about 400 nm (violet) to 750 nm (red). Because this wavelength is so much smaller than everyday objects, light appears to travel in straight lines. This "ray" picture gives us geometrical optics, which is enough to explain mirrors, lenses, prisms, and optical instruments.

The Ray Model

Light ray: A straight line along which light energy travels. A bundle of rays = a beam.

Speed of light in vacuum: c = 3×10⁸ m/s — the ultimate speed limit in nature.

Assumption of geometrical optics: Wavelength is much smaller than the objects it interacts with (true for everyday optics: mirrors, lenses, prisms).

Real Life Connect — Why Ray Optics Works
  • Shadows: Sharp shadows show light travels in straight lines.
  • Laser pointers: A straight beam you can see — this IS a ray.
  • Camera lenses: Designed using ray-tracing (no wave equations needed).
  • Mirrors: The ray model predicts reflections exactly.
  • Rainbows: Ray tracing through spherical water drops predicts the angles (42° for primary bow).
Key Takeaway

Light travels in straight lines (rays) when the wavelength is small compared to objects. This "geometrical optics" picture is enough for all mirrors, lenses, and prisms.

Section 02

Reflection of Light by Spherical Mirrors

9.2Laws of Reflection and Mirror Geometry

Laws of Reflection
  1. Incident ray, reflected ray, and normal at the point of incidence all lie in the same plane.
  2. Angle of incidence = angle of reflection (θᵢ = θᵣ), measured from the normal.

These hold for plane mirrors and at every point on spherical mirrors.

V1 · Reflection from a plane mirror Plane mirror normal incident reflected θᵢ θᵣ θᵢ = θᵣ (angle in = angle out)

Sign Convention — Cartesian System (from NCERT)

V2 · Cartesian sign convention x-axis → P (pole) Object incident light → Distances opposite to incident light: NEGATIVE Distances along incident light: POSITIVE Heights upward from x-axis: POSITIVE Heights downward from x-axis: NEGATIVE All distances measured from pole P
QuantitySignMeaning
Object distance uNegativeObject is usually to the left of pole
Real image distance vNegativeSame side as object
Virtual image distance vPositiveOpposite side (behind mirror)
Concave mirror focal length fNegativeFocus on same side as object
Convex mirror focal length fPositiveFocus behind mirror
Heights above axisPositiveUpright
Heights below axisNegativeInverted

Focal Length of a Spherical Mirror

For a spherical mirror, the radius of curvature R and focal length f are related by:

Focal Length Formula (from NCERT derivation)

f = R / 2

Derivation: For paraxial rays, the perpendicular from the point of incidence to the principal axis is nearly at the pole. Using small-angle approximations (tanθ ≈ θ), we get FD ≈ CD/2. Since FD → f and CD → R (as point D approaches pole P), we get f = R/2.

Valid only for paraxial rays (rays close to principal axis).

V3 · Concave vs convex mirror focus Concave (converging) F C Parallel rays → converge at F P Convex (diverging) F (virtual) C Parallel rays → diverge, as if from F (virtual) P

Mirror Equation and Magnification

From NCERT: using similar triangles A'B'F and MPF, and triangles A'B'P and ABP, and applying the sign convention, we get:

Mirror Equation (from NCERT derivation)

1/v + 1/u = 1/f

Where u = object distance, v = image distance, f = focal length — all with proper signs.

Linear magnification: m = h'/h = −v/u

Where h = object height, h' = image height. Positive m → upright (virtual). Negative m → inverted (real).

Valid for all cases: concave/convex, real/virtual.

V4 · Ray diagram — concave mirror forming real image F C P A B A' (image) B' Real, inverted image formed by concave mirror (object beyond C)
Mirrorf signImage typesTypical use
ConcaveNegativeReal (inverted) when object beyond f; Virtual (magnified) when within fShaving mirror, telescope, headlights, dentist's mirror
ConvexPositiveAlways virtual, erect, diminishedVehicle side mirrors, security mirrors, blind-corner mirrors
Planef = ∞Virtual, same size, same distance behindBathroom mirror, dressing mirror, periscope
Real Life Connect
  • Shaving/makeup mirror (concave): When your face is within focal length, you see a magnified, erect, virtual image.
  • Vehicle side mirrors (convex): "Objects in mirror are closer than they appear" — because convex mirrors form diminished images of farther objects.
  • Dentist's mirror (concave): Small curved mirror for magnified view of teeth.
  • Solar cookers (concave): Focus sunlight onto a small area to cook food.
  • Headlights (concave): Bulb at focus → parallel beam out.
  • Blind-corner mirrors (convex): At road intersections — wide field of view.
  • Hubble Space Telescope (concave): 2.4 m primary mirror — collects and focuses starlight.
Common Mistake

Mistake: "Concave mirror always forms a real image."
Correction: Only when the object is beyond the focal length. If placed between the pole and focus, a concave mirror gives a virtual, erect, magnified image — like a shaving mirror.

Mistake: "Convex mirrors can form real images."
Correction: Never! A convex mirror ALWAYS forms virtual, erect, diminished images.

Key Takeaway

Reflection: θᵢ = θᵣ. Focal length f = R/2. Mirror equation: 1/v + 1/u = 1/f. Magnification m = −v/u. Concave can form real or virtual images. Convex always virtual, erect, diminished. Sign convention is crucial.

Section 03

Refraction of Light

9.3Snell's Law and Refractive Index

When light crosses from one transparent medium to another, it bends. This is refraction. The bending happens because the speed of light differs in different media.

Snell's Law (from NCERT)

sin i / sin r = n₂₁

Where n₂₁ is the refractive index of the second medium w.r.t. the first.

Also: n₁ sin i = n₂ sin r (for two media with indices n₁, n₂)

Refractive index: n = c/v (c = speed in vacuum, v = speed in medium).

n₂₁ = n₂/n₁, and n₁₂ = 1/n₂₁.

V5 · Refraction at an interface Medium 1 (air, n₁=1) Medium 2 (glass, n₂=1.5) normal incident ray refracted un-deviated direction i r < i n₁ sin i = n₂ sin r · bends toward normal in denser medium
MediumRefractive Index nSpeed of Light
Vacuum1.0003.00 × 10⁸ m/s
Air1.0003~c
Water1.332.26 × 10⁸ m/s
Crown glass1.521.97 × 10⁸ m/s
Dense flint glass1.621.85 × 10⁸ m/s
Diamond2.421.24 × 10⁸ m/s
Important: Optical vs Mass Density

Don't confuse optical density (index of refraction) with mass density. Turpentine has lower mass density than water but higher optical density. It's the speed of light that matters, not weight.

Lateral Shift and Apparent Depth

Two Important Consequences

1. Lateral shift (through a parallel-sided glass slab): Emergent ray is parallel to incident ray but displaced sideways. Shift ∝ thickness, angle, and refractive index.

2. Apparent depth: For near-normal viewing, apparent depth (h₁) = real depth (h₂) / n. Objects under water appear closer!

Real Life Connect
  • Bent straw in water: Classic refraction illusion — the submerged part appears bent at the surface.
  • Swimming pools look shallower: Real depth / n = apparent depth. A 3 m pool looks ~2.3 m deep.
  • Sunrise/sunset lasts longer: Atmosphere bends sunlight around the Earth, so you see the Sun before it actually rises.
  • Diamond sparkle: Its high n causes intense refraction and TIR, making diamonds brilliant.
  • Mirages in desert: Hot air has lower n, so sky light bends upward into your eye.
  • Fish's view: A fish sees the entire above-water world compressed into a 97° cone ("Snell's window").
Common Mistake

Mistake: "Light always bends toward the normal when going into a denser medium."
Correction: Yes, if the second medium is optically denser (higher n), then r < i (bends toward normal). But if going from denser to rarer, it bends away (r > i) — this is why TIR happens.

Key Takeaway

Snell's law: n₁ sin i = n₂ sin r. n = c/v. Bends toward normal in denser medium. Explains bent straws, shallow pools, mirages, and diamond sparkle.

Section 04

Total Internal Reflection

9.4When Light Can't Escape

When light travels from a denser to a rarer medium (like water to air), it bends away from the normal. At a critical angle, the refracted ray grazes the surface (r = 90°). Beyond that — no refraction at all. All light reflects back inside. This is TIR.

Total Internal Reflection

Critical angle: sin i_c = n₂₁ = n₂/n₁ (where n₁ > n₂)

Alternatively: n₁₂ = 1/sin i_c (refractive index of denser w.r.t. rarer)

Conditions for TIR:

  1. Light must travel from denser to rarer medium (n₁ > n₂)
  2. Incident angle must exceed critical angle (i > i_c)

When TIR happens: no transmission — 100% reflection (unlike ordinary reflection, where some light passes through).

MediumRefractive index nCritical angle
Water1.3348.75°
Crown glass1.5241.14°
Dense flint glass1.6237.31°
Diamond2.4224.41°
V6 · TIR — three cases as angle increases Rarer (air) Denser (glass) i < i_c: normal refraction Light escapes into air i = i_c: grazing refraction refracted at 90° Refracted ray grazes surface i > i_c: TOTAL reflection 100% reflected back

TIR Applications (from NCERT)

Technological Applications of TIR

1. Prisms for bending light by 90° or 180°: Prisms designed to bend by these angles use TIR (requires i_c < 45°, which is true for glass). Also used to invert images.

2. Optical fibres: Core with high n, cladding with lower n. Light entering at one end undergoes repeated TIR along the length, emerging at the other end — even if fibre is bent. Used for internet data, endoscopy, decorative lamps.

3. Natural example — mirage: Hot air near ground has lower n than cooler air above. Light from sky TIRs off this "layer" and reaches your eye — appears as a "puddle."

4. Diamond sparkle: High n (2.42) → low i_c (24.4°). Light entering diamond undergoes multiple TIR → intense sparkle and "fire."

Real Life Connect
  • Global internet: Undersea fiber optic cables carry ~99% of all international data using TIR — across oceans!
  • Endoscopy: Fiber bundles let doctors see inside your body (stomach, colon) without surgery.
  • Binoculars: Use TIR prisms instead of silver mirrors — 100% reflectance vs silver's 96%.
  • Periscopes and camera viewfinders: TIR prisms redirect light with no loss.
  • Mirage on a hot road: Looks like water on the road — TIR of sky light off hot air layer.
  • Diamond "fire": Multiple TIRs inside the gem create its distinctive brilliance.
  • Endoscopes and arthroscopes: Medical imaging inside the body.
  • Decorative fountain lamps: Light pipes that glow along their length via TIR.
Interesting Consequence: The Fish's View

Water's critical angle to air is ~48.75°. A fish looking up sees the entire above-water world compressed into a bright circle with 2×i_c ≈ 97° angular size. Outside this "Snell's window," the fish sees total internal reflection of the lake bottom. Nature's own optics!

Key Takeaway

TIR: when light goes from denser to rarer at angle > critical angle, it totally reflects (100%). Powers fiber optics, endoscopy, diamond sparkle, mirages, and prism-based optics in binoculars.

Section 05

Refraction at Spherical Surfaces and Lenses

9.5Single Surface and Lenses

Refraction at a Single Spherical Surface (from NCERT derivation)

n₂/v − n₁/u = (n₂ − n₁)/R

Where n₁ = index of first medium, n₂ = index of second medium, u = object distance, v = image distance, R = radius of curvature of the surface.

Derived from Snell's law applied at the surface with small-angle (paraxial) approximation.

The Lens Maker's Formula

For a thin lens with two refracting surfaces (radii R₁ and R₂) in a medium of refractive index n₁, made of glass of index n₂:

Lens Maker's Formula (from NCERT)

1/f = (n₂₁ − 1)(1/R₁ − 1/R₂)

Where n₂₁ = n₂/n₁ = refractive index of lens material w.r.t. surrounding medium.

Convention: R₁ is positive if the first surface is convex toward the incoming light, R₂ is positive if the second surface is convex away from incoming light.

This formula allows designing lenses of desired focal length.

Thin Lens Equation and Magnification

Thin Lens Formula

1/v − 1/u = 1/f

Magnification: m = h'/h = v/u

Positive m → upright image (virtual). Negative m → inverted image (real).

Valid for convex and concave, real and virtual.

V7 · Convex vs concave lens Convex (converging) F F' Parallel rays → converge at F' Concave (diverging) F (virtual) Parallel rays → diverge as if from F

Power of a Lens

Power (P)

P = 1/f (with f in metres)

SI unit: dioptre (D) = m⁻¹.

Convex lens: P positive. Concave lens: P negative.

Example: f = 0.5 m convex lens → P = +2 D. f = −25 cm concave lens → P = −4 D.

Combination of Thin Lenses in Contact

Lenses in Contact

1/f = 1/f₁ + 1/f₂ + 1/f₃ + ...

P = P₁ + P₂ + P₃ + ...

Total magnification: m = m₁ × m₂ × m₃ × ...

This is why opticians prescribe "+2D reading glasses" — they're adding power in dioptres.

Lens Simulator — see how image position changes with object distance

Image distance v
15.0 cm
Magnification m
−0.50
Image type
Real, inverted
Real Life Connect
  • Eyeglasses: Concave lens for myopia (nearsightedness), convex for hyperopia.
  • Camera lenses: Multi-element combinations to correct aberrations.
  • Magnifying glass: Convex lens held closer than focal length → virtual, enlarged image.
  • Human eye: Cornea + eye lens = compound lens focusing on retina.
  • Projectors: Convex lens projects inverted real image on screen (slides loaded upside down!).
  • Contact lenses: Same physics as eyeglasses, sitting on the cornea.
  • Smartphone cameras: Lens stacks with different focal lengths (wide, telephoto, ultrawide).
  • Fresnel lenses in lighthouses: Concentric rings mimic a huge lens with much less weight.
Common Mistake

Mistake: "Power P = 1/f with f in cm."
Correction: P = 1/f with f in METRES. f = 20 cm → P = 1/0.2 = 5 D (not 0.05 D).

Mistake: "Convex lens always magnifies."
Correction: Only when object is within focal length. Object beyond 2f gives a diminished real image (like a camera).

Key Takeaway

Lens maker: 1/f = (n₂₁−1)(1/R₁ − 1/R₂). Thin lens: 1/v − 1/u = 1/f. Power P = 1/f (metres). Convex converges, concave diverges. Lenses in contact: powers add. Basis of cameras, glasses, microscopes, telescopes.

Section 06

Refraction Through a Prism

9.6Deviation and Dispersion

V8 · Ray through triangular prism — 3D dispersion A (refracting angle) White light Red (least deviation) Violet (most deviation) White light splits into spectrum due to dispersion
Prism Formulas (from NCERT)

Angle of prism: A = r₁ + r₂

Deviation: δ = i + e − A

At minimum deviation D_m: i = e, r₁ = r₂ = A/2, so:

n₂₁ = sin[(A + D_m)/2] / sin(A/2)

Thin prism (small A): D_m ≈ (n₂₁ − 1)A

Why Does Dispersion Happen?

The refractive index n depends on wavelength: n_violet > n_red. So violet light bends more than red inside the prism. This splits white light into a spectrum. The angular separation between colors is called angular dispersion = δ_v − δ_r. This same physics creates rainbows (in water drops) and diamond "fire."

Real Life Connect
  • Rainbows: Sunlight refracts and internally reflects in water droplets, splitting into colors (primary at 42°, secondary with reversed colors).
  • Diamond "fire": High n (2.42) and strong dispersion create brilliant flashes of color.
  • Spectrometers: Prisms analyze light from stars, metals, and samples — each element has a unique spectrum.
  • Chromatic aberration: Simple lenses focus different colors at different distances — corrected by compound "achromatic" lens systems.
  • Spectroscopy: Detecting the chemical composition of stars, planets, and materials.
Key Takeaway

Prism: A = r₁ + r₂, δ = i + e − A. At minimum deviation: n = sin[(A+D_m)/2]/sin(A/2). Different colors bend differently (dispersion). Explains rainbows, diamond fire, spectroscopy.

Section 07

Optical Instruments — Microscopes and Telescopes

9.7Magnification of the Very Small and Very Far

Simple Microscope

Simple Microscope (from NCERT)

A single convex lens used as a magnifier. Object within focal length → virtual, magnified, erect image.

Image at near point (D = 25 cm): m = 1 + D/f

Image at infinity: m = D/f

D is called "least distance of distinct vision" (~25 cm).

Limitation: practical m ≤ ~9. For higher magnification, use a compound microscope.

Compound Microscope

V9 · Compound microscope — two-stage magnification Objective Eyepiece Object 1st image Final (virtual) Compound microscope: objective (f_o short) + eyepiece (f_e short) m ≈ (L/f_o) × (D/f_e)
Compound Microscope (from NCERT)

Two lenses: objective (very short f_o) forms a real, inverted, magnified image of the object inside the focal length of the eyepiece. The eyepiece (short f_e) magnifies this further.

Total magnification: m = m_o × m_e

m ≈ (L/f_o) × (D/f_e) (image at infinity)

Where L = tube length (distance between second focus of objective and first focus of eyepiece), D = near-point distance (~25 cm).

For large magnification: short f_o, short f_e, large L. Practical maximum ~1500× (visible light).

Telescope

V10 · Refracting vs reflecting telescope Refracting Objective f_o large Eyepiece f_e small M = f_o / f_e Reflecting Primary mirror (concave) Secondary to eyepiece Uses mirror — no chromatic aberration
Telescope (from NCERT)

Refracting telescope: Objective (long f_o) + eyepiece (short f_e).

M = f_o/f_e (magnifying power)

Tube length = f_o + f_e (in normal adjustment, image at infinity).

Reflecting telescope: Uses a concave mirror as objective. Advantages: no chromatic aberration, lighter, allows huge apertures.

Key requirements: Large objective diameter for light gathering power and resolution.

Real Life Connect
  • Compound microscopes: Biology labs — cells, bacteria, viruses (up to ~1500× with visible light).
  • Electron microscopes: Use electron waves (much shorter wavelength) → magnifications up to millions ×.
  • Endoscopes (medical): Fiber-optic bundles → see inside body without surgery. Used in colonoscopy, arthroscopy.
  • Hubble Space Telescope: 2.4 m reflecting telescope, launched 1990, still producing stunning images.
  • James Webb Space Telescope: 6.5 m gold-coated primary mirror — sees further back in time than Hubble.
  • Keck Observatory: Twin 10 m reflecting telescopes in Hawaii.
  • Binoculars: Two small refracting telescopes side by side, TIR prisms to fold light path.
  • Smartphone camera: Multi-lens stack (8-15 lenses) — miniature telescope + microscope!
Exam Trap

Trap: "Telescope magnification is m = f_e/f_o."
Correction: It's m = f_o / f_e (objective over eyepiece). For large magnification, you need LONG objective focal length and SHORT eyepiece focal length. This is a very common mistake!

Key Takeaway

Simple microscope: m = 1 + D/f (near point). Compound: m ≈ (L/f_o)(D/f_e). Telescope: m = f_o/f_e. Reflectors use mirrors (no chromatic aberration, huge apertures). All medical, astronomical, and smartphone optics flow from this chapter.

Practice

📝 Solved Examples from NCERT

📋 NCERT Example 9.1

Q1. Suppose the lower half of a concave mirror's reflecting surface is covered with an opaque material. What effect will this have on the image of an object placed in front of the mirror?

Reasoning 1 Mark

The laws of reflection hold for every point on the remaining (upper) part of the mirror. So the whole image will still form.

Effect on image 1 Mark

Only the intensity of the image will be reduced (about half), but the full image forms. No part of the object is missing.

Full image forms; only intensity is reduced (approximately half).
📋 NCERT Example 9.3

Q2. An object is placed at (i) 10 cm, (ii) 5 cm in front of a concave mirror of radius of curvature 15 cm. Find position, nature, and magnification of the image in each case.

Setup ½ Mark

f = −R/2 = −7.5 cm (concave). Both u values are negative (object in front).

(i) u = −10 cm 1½ Marks

1/v = 1/f − 1/u = −1/7.5 + 1/10 = −(4/30) + 3/30 = −1/30

v = −30 cm

m = −v/u = −(−30)/(−10) = −3

Image: real, inverted, magnified 3×, 30 cm in front of mirror.

(ii) u = −5 cm 1½ Marks

1/v = 1/f − 1/u = −1/7.5 + 1/5 = −2/15 + 3/15 = 1/15

v = +15 cm

m = −v/u = −15/(−5) = +3

Image: virtual, erect, magnified 3×, 15 cm behind mirror.

(i) v = −30 cm, m = −3 (real, inverted, 3× larger)
(ii) v = +15 cm, m = +3 (virtual, erect, 3× larger)
📋 NCERT Example 9.4

Q3. Jogger running at 5 m/s approaches a parked car's side mirror (R = 2 m). Find speed of image when jogger is at (a) 39 m, (b) 29 m, (c) 19 m, (d) 9 m from the mirror.

Setup ½ Mark

Convex mirror, f = +1 m. v = fu/(u − f).

Image velocities (from NCERT) 2 Marks

Change in v when u changes by 5 m (1 s of running):

  • u = −39 → −34 m: image speed = 1/280 m/s
  • u = −29 → −24 m: image speed = 1/150 m/s
  • u = −19 → −14 m: image speed = 1/60 m/s
  • u = −9 → −4 m: image speed = 1/10 m/s
Interpretation ½ Mark

Even though jogger speed is constant, image speed increases dramatically as they approach — a familiar experience in parked cars!

Image speed increases: 1/280 → 1/10 m/s as jogger approaches.
📋 NCERT Example 9.5

Q4. Light from a point source in air falls on a spherical glass surface (n = 1.5, R = 20 cm). Distance of light source is 100 cm from glass. Where is the image formed?

Setup ½ Mark

u = −100 cm, R = +20 cm, n₁ = 1, n₂ = 1.5.

Formula ½ Mark

n₂/v − n₁/u = (n₂ − n₁)/R

Substitute ½ Mark

1.5/v + 1/100 = 0.5/20 = 0.025

1.5/v = 0.025 − 0.01 = 0.015

Solve 1 Mark

v = 1.5/0.015 = +100 cm

Image is 100 cm from glass surface, on the direction of incident light (inside the glass).

v = +100 cm (real image inside glass)
📋 NCERT Example 9.6

Q5. A magician makes a glass lens (n = 1.47) disappear in a trough of liquid. What is the liquid's refractive index? Could it be water?

Condition 1 Mark

For the lens to disappear, it must be optically invisible: n_liquid = n_lens. Then lens acts as a plane sheet of glass (f → ∞), no bending of light.

Answer 1 Mark

n_liquid = 1.47 (could be glycerine).

Water has n = 1.33, so NOT water. Glycerine (n ≈ 1.47) works.

n = 1.47 (e.g., glycerine). Not water (n = 1.33).
📋 NCERT Example 9.7

Q6. (i) f = 0.5 m for glass lens → find power. (ii) Double convex lens with R₁ = 10 cm, R₂ = 15 cm, f = 12 cm → find n. (iii) Convex lens has f = 20 cm in air. Find focal length in water.

(i) Power ½ Mark

P = 1/f = 1/0.5 = +2 D

(ii) Refractive index 1 Mark

1/f = (n−1)(1/R₁ − 1/R₂) = (n−1)(1/10 + 1/15) = (n−1)(5/30)

1/12 = (n−1)(1/6)

n−1 = 6/12 = 0.5 → n = 1.5

(iii) f in water 1½ Marks

In air (n₁ = 1, n₂ = 1.5): 1/20 = 0.5·K where K = (1/R₁ − 1/R₂)

→ K = 1/10

In water (n₁ = 1.33, n₂ = 1.5): 1.33/f = (1.5 − 1.33)·K = 0.17 × 1/10 = 0.017

→ f = 1.33/0.017 ≈ +78.2 cm

(i) P = +2 D, (ii) n = 1.5, (iii) f ≈ +78.2 cm in water
📋 3 Marks

Q7. A compound microscope has objective (f_o = 1 cm) and eyepiece (f_e = 2 cm) with tube length L = 20 cm. Find the magnifying power (image at infinity, D = 25 cm).

Formula ½ Mark

m ≈ (L/f_o) × (D/f_e)

Substitute ½ Mark

m = (20/1) × (25/2)

Compute 1 Mark

m = 20 × 12.5 = 250×

Interpretation 1 Mark

250× magnification — enough to see most cells and small microorganisms. Compare with typical lab microscope (~1500×).

m = 250×
Quick Reference

📐 Complete Formula Sheet

Chapter 9 — All Formulas on One Page

Laws of Reflection
θ_i = θ_r
Focal Length (spherical mirror)
f = R/2
Mirror Equation
1/v + 1/u = 1/f
Mirror Magnification
m = −v/u
Snell's Law
n₁ sin i = n₂ sin r
Refractive Index
n = c/v, n₂₁ = 1/n₁₂
Critical Angle
sin i_c = n₂/n₁ (n₁ > n₂)
Apparent Depth
h₁ = h₂/n
Single Spherical Surface
n₂/v − n₁/u = (n₂−n₁)/R
Lens Maker's Formula
1/f = (n₂₁−1)(1/R₁ − 1/R₂)
Thin Lens Equation
1/v − 1/u = 1/f
Lens Magnification
m = v/u
Power of Lens
P = 1/f (f in metres, unit D)
Lenses in Contact
1/f = 1/f₁ + 1/f₂ + ...
Prism: Relations
A = r₁ + r₂; δ = i + e − A
Prism (min deviation)
n = sin[(A+D_m)/2]/sin(A/2)
Thin Prism
D_m ≈ (n−1)A
Simple Microscope
m = 1 + D/f (image at D)
Simple Microscope
m = D/f (image at ∞)
Compound Microscope
m ≈ (L/f_o)(D/f_e)
Telescope
m = f_o/f_e
Constants
D ≈ 25 cm, c = 3×10⁸ m/s

📖 Notation Key

u, v, fObject distance, image distance, focal length
RRadius of curvature
R₁, R₂Radii of curvature of lens surfaces
mMagnification
n (or n₂₁)Refractive index
i, r, eAngles of incidence, refraction, emergence
i_cCritical angle
δ, D_mDeviation, minimum deviation
APrism angle
PPower (dioptre, D)
f_o, f_eFocal lengths of objective, eyepiece
LTube length (microscope)
DLeast distance of distinct vision (~25 cm)
Test Yourself

✍️ MCQ Practice

Score: 0 / 12
New Pattern

🎯 Assertion–Reason

(A) Both true, R explains A. (B) Both true, R does NOT explain A. (C) A true, R false. (D) A false, R true.

Score: 0 / 6